Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
1.1.
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using these shelves and cabinets.
Locate the cabinet in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is
9
adequate lighting.
WARNING! Use the cabinet on level and solid ground,
preferably concrete.
Keep the shelf clean and tidy in accordance with good
9
workshop practice.
Keep children and unauthorised persons away from the wor
9
area.
DO NOT use the cabinet for any purpose other than that
8
for which it is designed.
DO NOT use the cabinet outdoors.
8
DO NOT place the cabinet in a damp or wet location or an
8
area where there is condensation.
DO NOT clean the cabinet or shelves with any solvents
8
which may damage the surfaces or the protective coating.
DO NOT move the cabinet when there are items placed
8
inside.
DO NOT step on the shelves.
8
DO NOT overload the shelves or cabinet
8
2. INTRODUCTION
APICS2 Pack of two shelves for Model No. APICCOMBOH2. Supplied with easy assemble brackets for shelves to slide onto. APICS4
Pack of four shelves for Model No's APICCOMBO2, APICCOMBOF4, APICCOMOBO5 and APICCOMOBO7. Supplied with easy
assemble brackets for shelves to slide onto.
3.
SPECIFICATION
Model No: .......................................................... APICS2
Dimensions: ................ (W x D x H): 840 x 380 x 30mm
© Jack Sealey Limited
SHELF FOR INDUSTRIAL CABINETS PACK OF 2/4
APICS2, APICS4
MODEL NO:
Model No: .............................................................................. APICS4
Dimensions: ..................................... (W x D x H): 840 x 380 x 30mm
Original Language Version
APICS2
APICS4
APICS2 APICS4 Issue:2 (H,F) 25/08/23
Need help?
Do you have a question about the APICS2 and is the answer not in the manual?
Questions and answers