flat-jack 4260328330043 Owner's Manual

camper 2.0
flat-jack products GmbH
Leonhard-Strell-Str. 3 - 5
85540 Haar
Fon +49 89 454577 - 150
Fax +49 89 454577 - 155
info@flat-jack.de | www.flat-jack.de
/// Owner's manual
Thank you for choosing flat-jack®!
flat-jack® avoids flat spots on the tires of your camper mobile.
These flat spots arise through pressure load during long
standing times and can therefore badly reduce your driving
pleasure and safety.
flat-jack® guarantees the perfect adaption to every shape of
tire and a stressless levelling on uneven ground.
/// flat-jack®
flat-jack® retains the actual condition of the tires over long
periods of standing still of your automotive treasures. flat-jack®
can be used as levelling system on uneven ground.
Please read the instructions and safety guidelines of this manual
carefully to guarantee safe and secure operation of the flat-
jack® .
/// Disclaimer of liability
If the flat-jack® is used differently than described in this
instruction manual damage of the product, vehicle or even
people may occur. The manufacturer takes no liability for
damage arising from incorrect handling.
/// Advantages
Complete decoupling from the ground
Best thermic insolation by means of air
Unique concept with high contact area
Effective and even pressure distribution over the whole
contact area
Reduction and compensation of lateral forces on the entire
chassis
Simple to use (roll on, roll off)
By means of air: 100% effectiveness
High quality materials
High load capacity: for vehicles up to 6t
Light weight, easy to store
Design serves as centering aids
Levelling aid on uneven ground: camper up to 6cm / 2,35 inch
camper 2.0 up to 20cm / 7,87 inch
/// Not only an air pillow
Membrane concept
flat-jack® is constructed double-walled. The inner membranes
guarantee optimal density and the outer cover is responsible
for longevity and stabilisation of the shape.
Chamber concept
The special inner chamber structure with special partition
walls does not only allow an optimal adaption to each tire
shape but also distributes the pressure effectively by
enlarging the contact area. The uniqueness of flat-jack® also
results from reduction and compensation of lateral forces and
tensions on the entire chassis. The camper edition has a
special inner construction for camper vans, caravans etc.
Therefore one can walk around inside of such a vehicle while it
is resting on the air-pillows. They can also be used as levelling
system on uneven ground.
/// Getting started
Incorrect handling of this product may result in injury. Check
the flat-jack® always before usage. Make sure it is not
damaged and that the valves are also correctly functioning.
Please read the flat-jack® safety guidelines carefully before
use.
Made in
patented
Germany
World
novelty