Download Print this page

Advertisement

Quick Links

Thermostat Setting
The thermostat automatically regulates the temperature inside the cooler and freezer
compartments. Refrigerator temperatures can be obtained by rotating the knob to higher
numbers; 1 to 3, 1 to 5 or SF (Maximum numbers on the thermostat depends on your
product.)
1 – 2 : For short-term storage of food
3 – 4 : For long-term storage of food
5 : Maximum cooling position. The appliance will work longer.If required, change the
temperature setting.
If device has SF position:
• Turn the knob to SF to freeze fresh food quickly. In this position, the freezer compartment
will operate at lower temperatures. After your food freezes, turn the thermostat knob to its
normal use position. If you do not change the SF position, your appliance work will
automatically return to its last used thermostat position according to the time indicated in the
note. Return the thermostat switch to the SF position and return it to normal use according
to the time indicated in the note.If the thermostat switch is in the SF position when your
appliance is first started, your appliance work will automatically return to the operation in the
thermostat-3 position according to the time indicated in the note.
2754M – 2764M – EMT
INFORMATION
Thermostat knob

Advertisement

loading
Need help?

Need help?

Do you have a question about the 2754M and is the answer not in the manual?

Questions and answers

Summary of Contents for SOGEDIS 2754M

  • Page 1 2754M – 2764M – EMT INFORMATION Thermostat Setting The thermostat automatically regulates the temperature inside the cooler and freezer compartments. Refrigerator temperatures can be obtained by rotating the knob to higher numbers; 1 to 3, 1 to 5 or SF (Maximum numbers on the thermostat depends on your product.)
  • Page 2: Refrigerant Cycle Diagram

    2754M – 2764M – EMT REFRIGERANT CYCLE DIAGRAM CONDENSER F EVAPORATOR HOT PIPE CAPILLARY SUCTION PIPE DRYER COMPRESSOR...
  • Page 3 2754M – 2764M – EMT TROUBLE-SHOOTING CHART No/Insufficient cooling Check the Inform supply customer voltage (220-240v) (220-240v) Is it ok? Check the voltage at Is the power compressor Is compressor consumption of terminals working? compressor (220-240v) normal? Is it ok?
  • Page 4: Troubleshooting Chart

    2754M – 2764M – EMT TROUBLE-SHOOTING CHART Excessive Cooling Is the thermostat Adjust the setting appropriate thermostat to season according to conditions? seasonal conditions. Is there any Is the icing at icing the whole of formation in back wall (on...
  • Page 5 2754M – 2764M – EMT TROUBLE-SHOOTING CHART Door/Gasket Adjustment Is the Product ground should be on under the a firm and flat unit is surface flat? Are the Adjust the feet adjustable properly feet in correct according to position? ground surface...
  • Page 6 2754M – 2764M – EMT TROUBLE-SHOOTING CHART Abnormal Noise Product should be Hayır Is the ground on a firm and flat under the unit is surface flat? Adjust the Are the feet adjustable properly feet in correct according position? to ground...
  • Page 7: Assemble & Disassemble

    2754M – 2764M – EMT ASSEMBLE & DISASSEMBLE Changing The Door Swing Direction to Right Hand 1- Unscrew the two screws fixing the top hinge (Pic-1) and remove the refrigerator door. (Pic-2) Picture-1 Picture-2 2- Unscrew the two screws fixing the middle hinge side bracked and remove it.
  • Page 8 2754M – 2764M – EMT ASSEMBLE & DISASSEMBLE 4- Remove the bottom hinge pin (Pic-5) and insert it to the left side foot. (Pic-6) Picture-5 Picture-6 5- Unscrew the middle hinge side bracked on the left and remove it. (Pic-7) Remove the middle hinge screw caps (big) on the left side.
  • Page 9 2754M – 2764M – EMT ASSEMBLE & DISASSEMBLE 7- Remove the top hinge screw caps (big) on the left side (Pic-10) and insert them to the right side. (Pic-11) (You can find the new caps in the user manual bag)
  • Page 10 2754M – 2764M – EMT Removing/Assembling The Door Switch 1. Stick a tape to protect the body plastic. 2. Also flex the top-side of the switch and Flex it with the help of a tool like a slotted then displace by pulling. (Pic-2) screwdriver.
  • Page 11 2754M – 2764M – EMT Removing The Thermostat Box Gr Unscrew the screw fixing the thermostat box. Disconnect the connector after removing it.
  • Page 12 2754M – 2764M – EMT Removing- Assembling The Door Gasket Check the replacement gasket form. Pull the gasket towards starting middle of Starting with upper left corner, press on the the top edge as shown. Slowly pull towards gasket until it fits to its place..
  • Page 13 2754M – 2764M – EMT Barcode and Serial Number Explanation: Vestel refrigerator serial numbers are consist of 22 digits. DOOR COUNTRY DESIGN BRAND ENERGY CLASS VESTEL MODEL MONTH YEAR SERIAL NUMBER Cabinet Packaging Type Product Number of Type the party...

This manual is also suitable for:

2764mEmt