Related Manuals for Holman PROMASTER 40476PR
Summary of Contents for Holman PROMASTER 40476PR
- Page 1 Instruction Guide 40476PR Holman Rancho Cordova, CA 95742 800-343-7486 InstallationSupport@holman.com 20240116R1 DATE: ________________...
-
Page 2: Table Of Contents
• Any previously installed flooring must be removed prior to installing Holman flooring. • Floor must be assembled in vehicle. • 40475HW hardware kit may be necessary to install some accessories to Holman flooring. (40475HW sold separately). • 40477P threshold kit must be installed when installing Holman flooring. (40477P sold separately). -
Page 3: Parts List
Instructions – 40476PR Parts List For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 2... -
Page 4: Hardware
Instructions – 40476PR Hardware Step 1 – Remove Factory D-Rings • Using T40 Torx bit remove six OEM D-Rings. Be sure to save D-Rings if re- installation is desired. Step 2 – Position Floor Floor must be assembled in vehicle. •... -
Page 5: Step 3 - Install D-Ring Bolts
1-1/8” drill bit. • In the center of each hole, install a plus nut using the instructions below. • Use 1” x 3/8” plastic spacer (Holman p/n 40501) in each hole as needed to attach accessories to steel van floor. Alternate Method •... -
Page 6: Install Plus Nuts
Instructions – 40476PR Install Plus Nuts DO NOT drill beyond depth of floor or upper installation surface. Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products. •...
Need help?
Do you have a question about the PROMASTER 40476PR and is the answer not in the manual?
Questions and answers