Hanging Neck Negative Ion Air Purifier BLS-GB1 Instruction manual Please read the instruction manual carefully before installing and using this product Hefei Bolaisen Intelligent Technology Co., Ltd. FORWORD Dear users, Thank you for using the Hanging Neck Negative Ion Air Purifier. In order to properly use this product, please read this manual carefully before installation and use and keep it safe for later use.
charged for the first time. Please use standard charging device to charge. 2. Schematic Diagram 1, switch/speed control key 2, Bluetooth button 3, power/working status indicator 4, Bluetooth indicator 5, negative ion outlet 6, negative ion cleaning rod 7, air inlet 8, type-C charging interface 三...
key, play and pause. 四. Precautions for use 1. Do not put foreign matter or hands into the fan when the product is running, so as to avoid product damage or personal injury. 2, Built-in lithium battery, do not use in high temperature above 60℃, do not put the product near the open flame.
× ⚪ ⚪ ⚪ ⚪ ⚪ Circuit boards and components × Battery ⚪ ⚪ ⚪ ⚪ ⚪ Data cable ⚪ ⚪ ⚪ ⚪ ⚪ ⚪ Packaging ⚪ ⚪ ⚪ ⚪ ⚪ ⚪ This form is prepared in accordance with the requirements of SJ/T11364. : indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T26572.
Page 5
九. Product parameters Product Name :Hanging Neck Negative Ion Air Purifier Product model :BLS-GB1 Rated input :5V--2A Battery voltage :3.7V- Battery capacity :3800mAh Maximum power :6W Implementation standard: Q/0700LK003-2021 Negative ion concentration :≥1 million /cm³(10cm at the outlet) 十.Warranty card and instructions Thank you for your use, we will continue to improve the quality of service, with better quality, intimate service, return the majority of customers to our support and trust.
Page 6
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the BLS-GB1 and is the answer not in the manual?
Questions and answers