Advertisement
Quick Links
M 23 POWER, M 23 HYBRID
Assembly Instructions
Hybrid Connector
1.
2.
3.
4.
5.
6.
!
For socket insert strip the
shield to max. 12 mm instead
of 16 mm
Dimensions and specifications may be changed without prior notice. Further information at the HUMMEL Technik Center: www.hummel.com/en/circular-connectors/technical-center
7.
8.
9.
10.
!
Shielding braid and copper
tape must at least 0,5 mm
protrude over crimp area
7.000.900.912
TIP:
Put metal ring over con-
ductors between step 5 & 6
Wrap copper tape to reach 5 mm
outer diameter
crimp metal
put schrinking tube
ring over
over crimped area
crimped area
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hummel M 23 POWER
Summary of Contents for Hummel M 23 POWER
- Page 1 For socket insert strip the crimped area shield to max. 12 mm instead of 16 mm Dimensions and specifications may be changed without prior notice. Further information at the HUMMEL Technik Center: www.hummel.com/en/circular-connectors/technical-center...
- Page 2 M 23 POWER, M 23 HYBRID Assembly Instructions Hybrid Connector Make sure, that the braided shield doesn’t contact the rear O-ring Dimensions and specifications may be changed without prior notice. Further information at the HUMMEL Technik Center: www.hummel.com/en/circular-connectors/technical-center...
Need help?
Do you have a question about the M 23 POWER and is the answer not in the manual?
Questions and answers