Advertisement
television set
connections
VIDEO RECORDER CONNECTIONS
VIA THE AERIAL SOCKET
To tune your TV into your VCR you should refer to Manual
Programming (page 29).
The channel number (usually 36 or 60) is given in the manual of
your VCR. The programme selected for your VCR must be 9, 19
or 29.
Whenever you wish to use your VCR, you must select the
programme assigned to it.
VIA THE EURO-AV SOCKET 1 (AV1)
This is used to connect :
• Satellite receiver or decoder
• a VHS or 8mm video recoder or camcorder (VIDEO)
or a S-VHS or Hi-8mm video recorder or camcorder (S-VIDEO)
• a PC or video games console (RGB).
VIA THE EURO-AV SOCKET 2 (AV2)
This is used to connect :
• a VHS or 8mm (VIDEO), S-VHS or Hi-8mm (S-VIDEO) video
recorder.
If you have two VCRs connected, the decoder must be connected to the VCR connected to the Euro-AV1 socket .
If you have a satellite receiver, refer to the operating manual in order to find out the type of signal delivered then
select VIDEO, S-VIDEO or RGB .
You can also connect it to the decoder socket of the second VCR if the latter is fitted with one.
VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV2)
This is used to connect :
• a VHS or 8 mm(VIDEO)(VIDEO and AUDIO sockets)
• an S-VHS or Hi-8mm (S-VIDEO)(S and AUDIO sockets).
In order to maintain the optimum sound and picture quality
of your set, it is recommended not to connect 2 units to the
Euro- AV1 socket and the AUDIO/VIDEO/S sockets
simultaneously.
VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV3)
This is used to connect :
• to a camcorder VHS or 8 mm (VIDEO)(VIDEO and AUDIO sockets)
S-VHS or Hi 8 mm (S-VIDEO)(S and AUDIO sockets).
AV 1
AV 2
75 Ω
S-Video
VIDEO
L
AUDIO
R
23
Video recorder
and/or
Decoder
and/or
Satellite receiver
or
Camcorder
or
PC or video
games console
Video recorder
and/or
Satellite
receiver
(IN)
Video
Audio
(OUT)
VHS
S-VHS
GB
Advertisement
