REI WHD-PRO1T-K User Manual

1080p hdmi wireless transmitter & receiver kit

Hide thumbs

Table Of Contents

Quick Links

Download this manual

WHD-PRO1T-K

1080p HDMI Wireless

and Facebook

Transmitter & Receiver Kit

U S E R M A N U A L

www.orei.com

Table of Contents

Need help?

Do you have a question about the WHD-PRO1T-K and is the answer not in the manual?

Questions and answers

Summary of Contents for REI WHD-PRO1T-K

Page 1 ® WHD-PRO1T-K 1080p HDMI Wireless Follow us on Youtube and Facebook Transmitter & Receiver Kit U S E R M A N U A L www.orei.com...
Page 2: Table Of Contents
Table of Contents Introduction Page 04 Features Page 05 Package Contents Page 06 Specifications Page 07 Operation Controls and Functions Page 09 Application Page 11 FAQs & Troubleshooting Page 27 FCC Statement Page 29 Thank you for purchasing this product Thank you for purchasing this product.
Page 3 Registration page Please Activate your warranty by registering our product through the link below - www.orei.com/register Technical Support Need Help? Our experienced Technical Support Team is here for you to answer your questions, give technical advice or help troubleshoot your project to get you installed on time and on budget.
Page 4: Introduction
Introduction The WHD-PRO1T-K is a wireless presentation system designed to im- prove the meeting efficiency. It can also be used for education or enter- tainment. The product features both HDMI and VGA ports to accomo- date older and newer displays alike. You can also connect your phone directly to the receiver through WiFi and cast your phone screen on a display.
Page 5: Features
Features One-click screencast. Easily pause or resume screensharing with the press of a button. Up to 1080p resolution. 2.4GHz/5GHz dual-band wifi with high sensitivity antenna. Video Transmission up to 100ft line of sight. Low latency signal transmission; 0.2 seconds max. Supports H.264 compressing.
Page 6: Package Contents
Package Contents WHD-PRO1T-K Transmitter unit WHD-PRO1T-K Receiver unit DC 5V/2A Power Adapter (for Rx) Power cable (USB-A to USB-C cable) USB-C to HDMI adapter User Manual Page 06...
Page 7: Specifications
Specifications Technical WiFi Standard IEEE 802.11a/n/ac WLAN 2.4Ghz: 2412 MHz~2485MHz WiFi Frequency 5Ghz: 5180MHz~5240MHz (Band 1) Compression H.264 Lantency ≤0.2 seconds HDMI Compliance HDMI 1.3 HDCP Compliance HDCP 1.3 Output Resolution up to 1920x1080@60Hz Distance 100 ft (line of sight) Supports streaming protocols Miracast, AirPlay macOS, Windows®, iOS, iPadOS, An-...
Page 8 Specifications Physical Properties Transmitter Height 14.2mm Width 52mm Length 187.6mm Weight 50g / 1.7oz Power Consumption (Max) 4.5 W (MAX.) Power Supply DC 5V/ 0.9A Color Gray Housing Plastic Receiver Height 18.8mm Width 124mm Length 70mm Weight 168g / 5.9oz Power Consumption (Max) 10W (MAX.) Power Supply...
Page 9: Operation Controls And Functions
Operation Controls and Functions RECEIVER INTERFACE Top view Bottom view Reset Indicator Light (Pairing) ON/OFF Switch Front view Rear view Power jack 3.5mm jack HDMI Page 09...
Page 10 Operation Controls and Functions TRANSMITTER INTERFACE USB-C Indicator Light Power supply por t Click butto n Page 10...
Page 11: Application
Application Example Transmitter connection Connect the WHD-PRO1T-K Transmitter to the Source device (Computer/ Laptop). Note: You may need to use the USB adapter to power the Transmitter in these 2 situations: (1) The power supply through HDMI port is lower on some computers.
Page 12 Application Example Receiver connection Note: You cannot connect both HDMI and VGA outputs at the same time. You must connect either [HDMI OUT] or [VGA OUT + AUDIO OUT] at once Connect an HDMI cable to the HDMI output port on the Receiver and the other end to the HDMI input port on a display, such as a TV, Projector, or Monitor.
Page 13 Application Example Receiver connection Page 13...
Page 14 Application Example Casting instruction Casting: Transmitter to Receiver You can cast content from the source device via the Transmitter to the Receiver. Note : 32 Transmitters can be connected to 1 Receiver at the same time (Additional Transmitters can be purchased separately). Switch on the Receiver power.
Page 15 Application Example Page 15...
Page 16 Application Example Pairing Instructions *The Receiver and Transmitter were paired at the factory. *In case of pairing issues due to improper operation or other circum- stances during use, it is necessary to restore and repair the device as follows: Insert a pin into the “RESET” hole on the Receiver, then press and hold for 3 seconds, and it will enter pairing mode.
Page 17 Application Example Pairing Instructions Press the button on the Transmitter for more than 3 seconds and the LED will flash quickly, indicating the paring with Receiver is in progress. You must pair a Transmitter (or additional Transmitters) to the Receiver while the Receiver is open for pairing. When the LED on the Transmitter stays on, the connection is com- pleted.
Page 18 Application Example Pairing Instructions LED Status: Status Description Tx Light Flashes Quickly Pairing in progress between Tx& Rx Tx Light Flashes Slowly Tx and Rx are not paired Tx Light Solid On Tx and Rx are connected Rx Light Solid On Power is on Page 18...
Page 19 Application Example MAIN SCREEN of Rx When the WHD-PRO1T-K Rx is successfully turned on, the following screen will show on the display. *Outbound link can select only one of Wi-Fi (WLAN). Page 19...
Page 20 (Airplay or Miracast). SSID: Selecting the SSID WTR-5500-xxxxxx in the device’s Wi-Fi list. Password: Entering the password xxxxxxxx to connect your device with the WHD-PRO1T-K Receiver. (SSID & Password will be displayed on the screen) Page 20...
Page 21 Application Example WEB SETTING *WHD-PRO1T-K IP - When the device (laptop or mobile phone) is direct- ly connected with the WHD-PRO1T-K through SSID and password, you can access the Admin settings page for more advanced settings on a web browser.
Page 22 Application Example Settings Menu Internet Resolution Display mode Portrait mode Language Password Device name Compatible name WiFi Channel AirPlay Upgrade Pair with TX Reboot Reset to factory defaults Page 22...
Page 23 Application Example 2. Internet Settings Connect the outbound Wi-Fi router. Click internet, the device will search the available WiFi automatically. Choose the WiFi you would like to connect to and enter the password. Page 23...
Page 24 Application Example Settings Menu Information Icon Menu Description Internet Connect the Receiver to a Wi-Fi network with internet access: • To receive firmware updates • To stream content via Airplay or Miracast from a com- patible device • For devices that are connected to the receiver via Wi-Fi and need internet access.
Page 25 Application Example Icon Menu Description Device name Change the device name Compatible Select this option if you are experiencing connection mode errors usually from using older versions of Android (version 10 or lower). WiFi Channel Change the Wi-Fi band (e.g., 2.4 GHz / 5 GHz), coun- try setting, channel and bandwidth AirPlay Change streaming settings (e.g., “Mirror only”, “Mirror...
Page 26 Wi-Fi icon. Through the Control Centre go to the Screen Mirroring option, then select WTR-5500 (SSID) as target. Your iOS device’s screen will be shown on your TV through WHD-PRO1T-K receiver. Note : You may skip step 4 & 5 if your device can use Wifi and mobile Data 4G (cellular network) simultaneously or you don’t need internet access.
Page 27: Faqs & Troubleshooting
FAQs & Troubleshooting How to restore the device to factory settings? When the product is not functioning correctly, press and hold the Receiver Reset button for 10 seconds until the screen goes blank and the product restarts. The factory default settings will be restored.
Page 28 FAQs & Troubleshooting When no video is displayed Check the status of the light on the Transmitter. If it is stays on constantly, it means the Transmitter and Receiver are paired. You need to press the button on the Transmitter to start screen mirrroring.
Page 29: Fcc Statement
FCC Statement FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

REI WHD-PRO1T-K User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for REI WHD-PRO1T-K