Valeton DAPPER LOOPER Mini Owner's Manual page 2

Note: If there is no overdub, when playing, hold REC/PLAY footswitch will clear the Loop Memory.
The bi-color LEDs above the numbers 1,2,3,4 indicate the current
Loop Memory you're using.
Loop Memory 1-4 are shown in green, and Loop Memory 5-8 are
shown in red. The default Loop Memory is Loop Memory 1.
SAVE
Tap the PHRASE footswitch to switch forward Loop Memories.
When exporting a loop in one Loop Memory, all recordings (incl. overdubs) will be combined into
one audio file. If you don't need the overdubs, the save function will help.
To save a loop without overdub to the current Loop Memory:
1. Undo the last recording and stop playing.
2. Hold the PHRASE footswitch.
The LEDs under the knobs will flash quickly to indicate saving progress.
Note:
1. Saved loops can be deleted by holding the STOP footswitch.
2. Be careful that saving progress cannot be undone, and performing undo/redo will
clear the saved loops (the saved loops are without overdubs and will be "undone").
The contents of this manual are subject to change without notice.
LEDs Display