Related Manuals for XTM 673439
Summary of Contents for XTM 673439
- Page 1 PLU: 673439 CODE: FS8553S Manufactured and packaged for SRGS PTY LTD ABN 23 113 230 050 6 Coulthards Avenue Strathpine， QLD 4500, Australia MADE IN CHINA...
- Page 2 FRIDGE SLIDE WITH TABLE LARGE...
-
Page 3: General Information
General Information External size: L89.5 x W57.7 x H9.5cm Internal tray size: L85 x W53 x H3.4cm Net weight: 25kg nyloc nuts... - Page 4 Fridge slide needs to be installed on a flat even surface with a minimum of 12 mm thickness. You will require the use of an electric drill to install the slide. Pull out the sliding tray by depressing the lock Mark the six drilling points through the fixing levers on both sides, then pull sliding tray holes with a permanent marker.
- Page 5 Secure your fridge on the sliding tray by using the 4 nylon straps supplied. Make sure the straps are tight and secure.
- Page 6 The fridge slide must be securely and evenly bolted down to the floor of the vehicle or to wherever the slide is to be used. Under no circumstances can the slide be used other than when it is fixed down correctly on a smooth even surface with no contortion of the frame.
Need help?
Do you have a question about the 673439 and is the answer not in the manual?
Questions and answers