Download
Share
Print this page
Telefire TIP-224A Technical Manual
  1. Manuals
  2. Brands
  3. Telefire Manuals
  4. Marine Equipment
  5. TIP-224A
  6. Technical manual

Telefire TIP-224A Technical Manual

Addressable alarm notification sounder
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
T
F
& G
D
ELEFIRE
IRE
AS
ETECTORS
PO Box 7036
Petach Tikva 49250
Israel
Tel:
972 3 970 0400
Fax:
972 3 921 1816
eMail:
info@telefire.co.il
Web:
www.telefire.co.il
Alarm Notification Sounder
L
TD
TIP-224A
Addressable
Technical Manual
TIP- - - - 224A
TIP
TIP
TIP
Revision 1.13
May 2014
224AEn
En113
113.pdf
.pdf
224A
224A
En
En
113
113
.pdf
.pdf

Advertisement

loading
Need help?

Need help?

Do you have a question about the TIP-224A and is the answer not in the manual?

Questions and answers

Summary of Contents for Telefire TIP-224A

  • Page 1 TIP-224A Addressable Alarm Notification Sounder Technical Manual & G ELEFIRE ETECTORS PO Box 7036 Petach Tikva 49250 TIP- - - - 224A 224AEn En113 113.pdf .pdf 224A 224A .pdf .pdf Israel Tel: 972 3 970 0400 Fax: 972 3 921 1816 Revision 1.13...

  • Page 3: Installation

    LED. The TIP-224A is compatible with the ADR-3000 Addressable Control Panel. The address of the TIP-224A is programmed into the memory of the horn and can be assigned or changed by using the PROG-4000 programmer. The sounder contains an alarm LED that is viewable from 360° . This LED flashes when polled by the control panel, indicating normal operation.
  • Page 4 The module requires 24Vdc from the ADR-3000 or an auxiliary power supply such as the TPS-34A. Use an auxiliary power supply such as the TPS-34A whenever the TIP-224A is installed a long distance from the ADR-3000 or whenever the total current consumption of all output devices exceeds the capability of the ADR-3000's 24Vdc output.
  • Page 5 3.3.2 Address Programming Assign the TIP-224A address in the range of 1 – 127 prior to installation by using the PROG-4000 Addressable Sounder and Accessory Programmer. Plug the module programming cable to the PROG-4000’s “Card Prog” output and connect the add-on base for TIP-224A sounder to the cable (see Figure 2).

  • Page 6: Troubleshooting

    TIP-224A © 1999 – 2014 Telefire Fire & Gas Sounders Ltd Revision 1.13 May 2014 Post-Installation 3.4.1 Post-Installation Test Test the activation matrix by activating the appropriate initiating devices and verify that the outputs are activated as specified by the planning consultant.