HECATE C4 Quick Start Manual

EN 01 Product description
1
Note:
• Images are for illustrative purposes only and may differ from the actual product.
• For the need of technical improvement and system upgrade, information and
specifications contained herein may be slightly different from actual product.
If any difference is found, the actual product prevails.
02 What' s in the box?
Quick start guide
03 Use
1. For optimum cooling performance, please use an adapter of 30W or higher.
2. Connect C4 to a power source via the included charging cable, and it will
automatically turn on and operate at its highest level when connected;
3. Press and hold the "
04 Installation
Install the magnetic plate
1
Remove the protective film from the
magnetic plate and paste it onto the
rear of the phone.
05 Specifications
Model
Mounting type
TEC area
Total power
Model: EDF704001
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
© 2024 Edifier International Limited. All rights reserved.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO., LTD.
NOTICE:
For the need of technical improvement and system upgrade, information contained
herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from actual
product. If any difference is found, the actual product prevails.
Magnetic Phone Cooler
2 3
4 5 6
Magnetic plate
" button to turn off C4.
EDF704001
Magnetic type
40*40mm²
27W max.
For more information, please visit our website:
Quick Start Guide
Lights
1
Multi-function "
2
• Press and hold for 1.5s: power on/off
• Press: switch light effects
Cooling level switch
3
• Press: switch among "Cold",
"Medium" and "Freeze"
USB-C charging port
4
Lights on/off
5
Heat sink
6
Charging cable
Brand card
Install C4
2
Remove the protective film from C4
and place it close to the magnetic
plate, then C4 will be automatically
absorbed onto the magnetic plate.
Product features Cooling and heat dissipation
Fan
Connector
Input
" button
Brand sticker
7-blade fan
USB-C port
12V 3A