Advertisement
Quick Links
Assembly instruction
ALL IN ONE
Soccer goals
„transportable & self locking"
Completely welded
Cat.-no.: 114 / 115 / 1159
F18460, F18461
Kübler
Thanks for choosing Haspo equipment. In order to enjoy this product please read the following
instructions for safety, use and maintenance before assembly and use.
As this goal is completely welded only the net and rollers needs to be mounted at the goal and
the attached steel weights have to be fixed in the ground tube (see points 2 and 3).
By means of the welded handles the goal can easily be tipped backwards onto the rollers and
then be transported or moved.
1. Scope of delivery:
Please check the following content before assembly. The nets are not part of the
delivery.
Steel weight, length 1.200mm
Steel weight,
length 600mm
Description:
Completely welded goal
Steel weight, length 1.200mm
Steel weight, length 600mm
Wheel
Accessories:
Net holder
Wheel axle
Plastic washer
Cap for wheel axle
Plastic cap with 4 rounded corners
Plastic cap with 2 rounded corners
Assembly instruction
Piece
F18461
Cat.-no.: 114
Cat.-no.: 115
7,32 x 2,44m
5,00 x 2,00m
1
4
0
2
105
2
4
4
2
2
1
6
3 x 2 m
Only by cat.-no. 1159:
4 additional plastic
caps
Piece
Piece
F18460
Cat.-no.: 1159
3,00 x 2,00m
1
4
0
2
75
65
2
4
4
2
2
1
1
2
3
2
2
4
4
4
4
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kübler F18460
Summary of Contents for Kübler F18460
- Page 1 „transportable & self locking” Completely welded Cat.-no.: 114 / 115 / 1159 F18460, F18461 Kübler Thanks for choosing Haspo equipment. In order to enjoy this product please read the following instructions for safety, use and maintenance before assembly and use.
- Page 2 2. Assembly of the wheels: Mount the wheels as follows: Hit the axle cap onto 1 wheel axle with a rubber mallet. Insert the wheel axle from the outside through the hole in the wheel holder. Then stick 1 plastic washer on the wheel axle. Place the wheel between the wheel holder and insert the wheel axle through the wheel hole.
- Page 3 F18461 7.32 x 2.44m F18460 5.00 x 2.00m 3.00 x 2.00m 1159 Use all the other included net holders for the door corners and other connections. When mounting the net at the ground tube fix net holders rear into the groove.
- Page 4 Cat.-no.: 114 (7,32 x 2,44m) Cat.-no.: 1159 (3,00 x 2,00m) F18461 F18460 Cat.-no.: 115 (5,00 x 2,00m) b) Fix plastic caps at each side of the open ground tubes ends. Stick 1 plastic cap with only 2 rounded edges into the bottom of each ground tube end.
- Page 5 5. Maintenance, storage and safety instructions: This goal is constructed only for soccer matches and not for other purposes. Check all screwed fastenings before use and repeat it from time to time. It has to be protected against overturning at any time. Do not climb net or goal frame.
Need help?
Do you have a question about the F18460 and is the answer not in the manual?
Questions and answers