1. Manuals
  2. Brands
  3. Wallenstein Manuals
  4. Computer Hardware
  5. WP1624 Series
  6. Operator's manual

Wallenstein WP1624 Series Operator's Manual

Firewood processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
Serial number 1102664 and up
WP 1624 Series
Firewood Processor
™ TECHNOLOGY
Rev Apr-2024
Part Number: Z97106_En

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WP1624 Series and is the answer not in the manual?

Questions and answers

Prairies mcadam
July 27, 2025

i need a diagram for the wiring harness for the switch

0

Subscribe to Our Youtube Channel

Summary of Contents for Wallenstein WP1624 Series

  • Page 1 OPERATOR'S MANUAL Serial number 1102664 and up WP 1624 Series Firewood Processor ™ TECHNOLOGY Rev Apr-2024 Part Number: Z97106_En...

  • Page 2: Table Of Contents

    WP1624 Series Firewood Processor Table of Contents 1. Introduction ............4 Check the Hydraulic Fluid Level ......45 Delivery Inspection Report ........5 Check the Chain Saw Bar Oil Level ...... 46 Serial Number Location ......... 6 Check the Saw Chain ......... 46 Types of Labels on the Machine ......
  • Page 3 WP1624 Series Firewood Processor 13. Troubleshooting ..........77 13.1 Machine Troubleshooting ........77 13.2 Conveyor Troubleshooting ........78 14. Specifications ...........79 14.1 Machine Specifications ........79 14.2 Conveyor Specifications ........80 14.3 Machine Dimensions ........... 81 14.4 12 ft Conveyor Dimensions ......... 82 14.5...

  • Page 4: Introduction

    1. Introduction Keep this manual handy for frequent reference and to pass on WARNING! to new operators or owners. Call your Wallenstein dealer or the Distributor if you need assistance, information, or additional Do not start or operate the machine before copies of the manuals.

  • Page 5: Delivery Inspection Report

    Introduction Firewood Processor 1.1 Delivery Inspection Report Wallenstein WP1624 Firewood Processor To activate warranty, register your product at WallensteinEquipment.com. This form must be filled out by the dealer at the time of delivery, then signed by the dealer and customer.

  • Page 6: Serial Number Location

    WP1624 Series Introduction Firewood Processor 1.2 Serial Number Location Always provide the model and serial number of your Wallenstein product when you order parts, or request service or other information. The product information plate location is shown in the following illustration.

  • Page 7: Types Of Labels On The Machine

    These labels provide operating information on a feature of the machine. When getting familiar with the Wallenstein product, notice that there are numerous labels located on the machine. There are different types of labels for safety, information, and product identification.

  • Page 8: Safety

    YOU are responsible for the safe operation and maintenance of DANGER your Wallenstein product. YOU must make sure that you and Identifies a hazardous situation that, if not avoided, will result in anyone else who uses, maintains, or works around the machine serious injury or death.

  • Page 9: Safety Rules

    Wallenstein • Do not touch hot engine parts, muffler cover, hoses, engine Equipment. body, or engine oil during operation and after the engine has been shut off.
  • Page 10 WP1624 Series Safety Firewood Processor • Train all operators to be familiar with equipment's operation. • Place machine in a Safe Condition before servicing or The operator should be a responsible, properly trained and repairing. See page 10. physically able person familiar with machinery. If the elderly •...

  • Page 11: Equipment Safety Guidelines

    WP1624 Series Safety Firewood Processor 2.6 Equipment Safety Guidelines 2.6.2 Hydraulic System Safety • Make sure that all the components in the hydraulic system The safety of the operator and bystanders is one of the main are kept clean and in good condition.
  • Page 12 WP1624 Series Safety Firewood Processor • Do not overfill the fuel tank. Fill until the fuel level is visible • Eye Contact: Flush with water for 15 minutes. Get 1/2" (12 mm) below the filler neck to leave room for prompt medical attention.

  • Page 13: Make The Work Area Safe

    WP1624 Series Safety Firewood Processor • DO NOT touch hot muffler or cooling fins. Contact may • Welding on painted surfaces releases dangerous fumes cause burns. and results in a poor weld joint that can result in failure and potential accidents. Always remove paint from areas to be •...
  • Page 14 WP1624 Series Safety Firewood Processor When processing logs with this machine, create a safe work 3. Danger Zone – Only workers are allowed in the Danger area around the entire operation. The work area should be Zone and must always make eye contact with the operator split up into the following zones, based on the level of safety before entering.

  • Page 15: Sign-Off Form

    An untrained operator is unqualified to use this machine. Wallenstein Equipment Inc. follows the general safety standards specified by the International Organization for Standardization A sign-off sheet is provided to keep a record of personnel that (ISO).

  • Page 16: Safety Labels

    Replacement safety labels are available damaged, or illegible. If a component is replaced from your local Wallenstein Equipment dealer or distributor. and it has a safety label on it, apply a safety label to the new component. Operating the machine •...

  • Page 17: Safety Label Locations

    WP1624 Series Safety Labels Firewood Processor 3.2 Safety Label Locations Numbers correspond with the Safety Label Explanations on page 23. 02637 Fig. 3 – Safety Label Locations - Front and Right Side...
  • Page 18 WP1624 Series Safety Labels Firewood Processor 0° 02638 Fig. 4 – Safety Label Locations - Rear and Left Side...
  • Page 19 WP1624 Series Safety Labels Firewood Processor 02639 Fig. 5 – Safety Label Locations - Rear and Right Side...
  • Page 20 WP1624 Series Safety Labels Firewood Processor 02648 02649 Fig. 6 – 12 ft Conveyor Safety Label Locations...
  • Page 21 WP1624 Series Safety Labels Firewood Processor 02650 Fig. 7 – 24 ft Conveyor Safety Label Locations - Right Side...
  • Page 22 WP1624 Series Safety Labels Firewood Processor 02651 Fig. 8 – 24 ft Conveyor Safety Label Locations - Left Side...

  • Page 23: Safety Label Explanations

    WP1624 Series Safety Labels Firewood Processor 3.3 Safety Label Explanations 4. Warning! Risk of hands being pinched or caught in 1. Caution! drive chain resulting in serious injury. Refer to the operator's manual. Read Keeps hands clear of this area.
  • Page 24 WP1624 Series Safety Labels Firewood Processor 8. Warning! 12. Warning! Risk of falling off Risk of burns to exposed skin from hot machine causing surfaces. personal injury. Stay clear of hot exhaust system. Do not step or stand on this surface. Use provided steps and hand holds.
  • Page 25 WP1624 Series Safety Labels Firewood Processor 15. Warning! Risk of serious injury or death if the engine is not shut off during maintenance procedures. Shut off the engine and remove the key. 16. Warning! Risk of injury from falling off equipment.

  • Page 26: Familiarization

    WP1624 Series Familiarization Firewood Processor 4. Familiarization The Wallenstein WP1624 Firewood processor is designed to 4.3 Operator Orientation process cut logs into split firewood. Logs are loaded onto the live deck and moved onto a conveyor where they are fed into IMPORTANT! When describing controls throughout this the saw.

  • Page 27: Machine Components

    WP1624 Series Familiarization Firewood Processor 4.4 Machine Components 02641 Fig. 15 – Machine Components - Rear Left Side 1. Live deck 8. Top roller assembly 2. Operator seat 9. Fuel tank 3. Wedge assembly 10. Battery 4. Hand jack (rear left side) 11.
  • Page 28 WP1624 Series Familiarization Firewood Processor 02642 Fig. 16 – Machine Components - Front Right Side 1. 12 ft conveyor hydraulic control 8. Trailer hitch 2. Chain saw shield 9. Trailer jack 3. Log-stop guide 10. Live deck support (1 of 2) 4.

  • Page 29: Ft Conveyor Components

    WP1624 Series Familiarization Firewood Processor 4.5 12 ft Conveyor Components This section only applies to a WP1624-12. Fig. 17 – 12 ft Conveyor Components 1. Conveyor pivot 5. Conveyor chain 9. Conveyor hopper 2. Chute lock arm 6. Hydraulic motor 10.

  • Page 30: Ft Conveyor Components

    WP1624 Series Familiarization Firewood Processor 4.6 24 ft Conveyor Components This section only applies to a WP1624-24. Fig. 18 – 24 ft Conveyor Components 1. Conveyor hopper 6. Upper folding frame 11. Wheels 2. Conveyor chain 7. Hand winch 12. Flow control valve 3.

  • Page 31: Controls

    WP1624 Series Controls Firewood Processor 5. Controls WARNING! Do not operate the machine until you are thoroughly familiar with the position and function of the various controls. Read the operator’s manual thoroughly. Your safety is involved! W065 5.1 Operator Panel Controls 02624 Fig.
  • Page 32 WP1624 Series Controls Firewood Processor 5.1.1 Splitter Control Lever 5.1.5 Infeed Conveyor Control Lever This lever controls the splitter. This lever controls the log infeed conveyor chain. • Push the lever forward away from the operator to extend the splitter cylinder.
  • Page 33 WP1624 Series Controls Firewood Processor 5.1.9 Tachometer or Hour Meter Display 5.1.12 Ignition Switch Tachometer When the engine is on (the ignition switch is in WARNING! the RUN position), the display shows the current engine revolutions per minute (RPM). The engine can cause serious bodily harm...

  • Page 34: Hydraulic-Fluid Filter Gauge

    WP1624 Series Controls Firewood Processor 5.2 Hydraulic-Fluid Filter Gauge 5.3 Operator Platform and Seat The hydraulic-fluid filter gauge shows the pressure of the IMPORTANT! Before you transport the firewood processor hydraulic fluid when it enters the hydraulic-fluid filter. If the...

  • Page 35: Conveyor Controls

    WP1624 Series Controls Firewood Processor 5.4 Conveyor Controls 5.4.2 Conveyor Winch Handle • Raise- Turn the hand winch clockwise to raise the This section describes the controls for conveyors that are conveyor. optional equipment. An integrated 12 ft (3.6 m) is pinned to the •...
  • Page 36 WP1624 Series Controls Firewood Processor 5.4.4 12 ft Conveyor Pivot The 12 ft conveyor can pivot up to 50 degrees on both sides of the machine. 00385 Fig. 14 – Adjust the Conveyor Angle 5.4.5 24 ft Conveyor Wheel Adjustment The 24 ft conveyor wheels can be adjusted to move the conveyor sideways.

  • Page 37: Machine Setup

    WP1624 Series Machine Setup Firewood Processor 6. Machine Setup • Use the bubble level on the front of the trailer frame as a 6.1 Position the Machine at the Site guide to park the machine in a level area. WARNING!

  • Page 38: Lower The Live Deck

    WP1624 Series Machine Setup Firewood Processor 6.2 Lower the Live Deck 2. Pull the live deck down using the handles on the sides. 00384 Fig. 23 – Live Deck Handles 3. Pull, turn and reinsert the deck pins to lock it in position.

  • Page 39: Block Dropper

    WP1624 Series Machine Setup Firewood Processor 6.3 Block Dropper 6.3.1 Adjust the Block Dropper Set the block dropper for typical log size. The gas struts can be • The block dropper is mounted on the back of the splitting adjusted together or independent of each other.

  • Page 40: Log-Stop Guide

    WP1624 Series Machine Setup Firewood Processor 6.4 Log-Stop Guide 6.5 Chain Saw Shield Position the log-stop guide for desired firewood length and • Adjust the position of the chain saw shield as required. consistent saw cuts. • Replace the impact-resistant glazing if any scratches or other damage cause glare from the sun or obstruct the •...

  • Page 41: Conveyor Setup

    WP1624 Series Conveyor Setup Firewood Processor 7. Conveyor Setup 7.1 Set Up a 12 ft Conveyor 1. Disconnect the conveyor from the chute lock arms. 2. Lower the conveyor using the hand winch. For instructions, see page 39. 3. Set the conveyor height as required.

  • Page 42: Set The Conveyor Angle

    WP1624 Series Conveyor Setup Firewood Processor 7.5 Move the Conveyor Sideways This section applies to a 24 ft conveyor only. 1. Unload the conveyor. Wait until the machine processes all the firewood. 2. Stop the machine. For instructions, see page 48.

  • Page 43: Pre-Start Checklist

    WP1624 Series Pre-Start Checklist Firewood Processor 8. Pre-Start Checklist Efficient and safe operation of the Wallenstein firewood 8.1 Before Starting the Engine processor requires understanding operation and safety precautions outlined in this section. WARNING! Follow the pre-operation checklist for personal safety and to keep the machine in good mechanical condition.

  • Page 44: Check The Fuel Level

    WP1624 Series Pre-Start Checklist Firewood Processor 8.2 Check the Fuel Level 8.3 Check the Engine Oil Level Check the fuel level daily. A gauge on the top of the tank IMPORTANT! For more information about engine oil, see indicates fuel level. The fuel tank is located on the left-hand side the engine manufacturer's manual and Engine Oil on page of the machine below the tool box.

  • Page 45: Check The Hydraulic Fluid Level

    WP1624 Series Pre-Start Checklist Firewood Processor 8.3.1 Add Oil to the Engine 8.4 Check the Hydraulic Fluid Level Check hydraulic fluid level daily. The hydraulic fluid reservoir IMPORTANT! For more information about engine oil, see sight glass is on the front of the reservoir. Check level with the the engine manufacturer's manual and Engine Oil on page engine stopped.

  • Page 46: Check The Chain Saw Bar Oil Level

    Refer to the Oregon® Mechanical Timber Handbook for additional information on the saw chain and bar. A copy of this manual can be found on the Wallenstein website under Technical Reference.

  • Page 47: Machine Break-In

    WP1624 Series Pre-Start Checklist Firewood Processor 8.7 Machine Break-In Although there are no operational restrictions on the firewood processor when used for the first time, it is recommended that the following mechanical items be checked: For new saw chain, check tension often during the first 10 minutes of use.

  • Page 48: Operating Instructions

    WP1624 Series Operating Instructions Firewood Processor 9. Operating Instructions For engine control information, see Operator Panel Controls on 9.2 Stop the Machine page 31. 1. Stop cutting and splitting logs. Clear all split wood out. Refer to the engine manufacturer owner's manual for further Move hydraulic controls to the Neutral position.

  • Page 49: Live Deck

    WP1624 Series Operating Instructions Firewood Processor 3. Move each hydraulic cylinder through its full working range If logs are shorter than 6 ft (1.8 m), load them several times until the hydraulic function operates normally. from the other side. If the functions are still slow, it may take more time to warm the hydraulic fluid.

  • Page 50: Infeed Conveyor

    WP1624 Series Operating Instructions Firewood Processor 9.6 Infeed Conveyor The infeed conveyor moves the log to the saw. IMPORTANT! Before advancing the log, always make sure saw is raised FULLY. Running the log into the saw can damage it. 00398 Fig.

  • Page 51: Cut Wood

    WP1624 Series Operating Instructions Firewood Processor 9.8 Cut Wood • When starting a new log, push the lever back up vertical. With the lever vertical (roller unclamped) the clamp WARNING! arm holds its raised position unless the saw is moved. Pulling the saw down to cut, the roller Risk of serious injury or death from clamps down on the log.
  • Page 52 WP1624 Series Operating Instructions Firewood Processor 01384 Fig. 53 – Saw Control Lever IMPORTANT! When cutting, make sure bar oil is visible coming off the tip of the saw. If not, adjust the bar oil flow 01052 rate. See page 43.

  • Page 53: Adjust The Bar Oil Flow Rate

    WP1624 Series Operating Instructions Firewood Processor 9.9 Adjust the Bar Oil Flow Rate 2. Loosen the bar nuts. Adjust bar oil flow rate by opening or closing the flow control valve on the side of the bar oil reservoir. Ambient temperatures affect oil flow rate.

  • Page 54: Split Wood

    WP1624 Series Operating Instructions Firewood Processor 9.10 Split Wood Adjust the Wedge Height The control lever is on the upper part of the control panel, to the far left-hand end. Wedge height can be quickly adjusted while working. A six-way wedge is available as an accessory.
  • Page 55 WP1624 Series Operating Instructions Firewood Processor If the firewood is less than 24", it is not necessary to push the log completely through the wedge. Split the log partially, and then let the next log push it through. For the best efficiency, advance the log for the next cut while the pushblock is retracting.

  • Page 56: Process Logs Quickly

    WP1624 Series Operating Instructions Firewood Processor 9.11 Process Logs Quickly 1. Advance the log to the stop. 2. Cut the log off so it falls into the splitter cradle. 3. Split the block while advancing the log up to the stop again.

  • Page 57: Transport

    WP1624 Series Transport Firewood Processor 10. Transport 10.2 Prepare the Machine for IMPORTANT! Equipment that is transported on a public roadway must comply with the local laws that govern the Transport safety and transport of machinery. 1. Clear out all logs and clean all debris from the firewood Before taking the machine on a public roadway, install the processor.

  • Page 58: Attach And Unhook

    WP1624 Series Transport Firewood Processor 10.4 Attach and Unhook Make sure the area in front of the machine is clear of debris and other equipment. 1. Using the trailer jack, raise the firewood processor so that the coupler is higher than the ball hitch on the tow vehicle.

  • Page 59: Trailer Breakaway System

    WP1624 Series Transport Firewood Processor 10.5 Trailer Breakaway System 10.5.1 Attach a Breakaway Cable • Connect the breakaway wire cable to the tow vehicle so it WARNING! is independent of safety chains and wire harness. There should be a clear path for the cable from the switch to the Never use the Trailer Breakaway Switch as a tow vehicle.

  • Page 60: Ft Conveyor Transport Position

    WP1624 Series Transport Firewood Processor 10.6 12 ft Conveyor Transport Position 10.7 Transport a 24 ft Conveyor IMPORTANT! When unfolding the conveyor for use, make IMPORTANT! Equipment that is transported on a public sure that the chain engages over the sprocket as it tightens roadway must comply with the local laws that govern the by the action of unfolding and clamping.

  • Page 61: Storage

    WP1624 Series Storage Firewood Processor 11. Storage After the season's use or when the machine will not be used for 11.2.1 Replace the Engine Fuel a period of time, completely inspect all major systems of the firewood processor. Replace or repair any worn or damaged...

  • Page 62: Service And Maintenance

    WP1624 Series Service and Maintenance Firewood Processor 12. Service and Maintenance 12.1.5 Engine Oil WARNING! Briggs & Stratton® Warranty Certified oils are recommended Risk of serious personal injury. Stop engine for best performance. Other high-quality detergent oils are before performing ANY service or maintenance permitted if classified for service SF, SG, SH, SJ or higher.

  • Page 63: Machine Maintenance

    WP1624 Series Service and Maintenance Firewood Processor 12.2 Machine Maintenance Every 250 Hours Check the valve clearance. See the engine manual. WARNING! Every 400 Hours Before you start service or maintenance: Replace the engine fuel filter and air filter. See the engine manual.
  • Page 64 WP1624 Series Service and Maintenance Firewood Processor Fig. 75 – Grease Points...

  • Page 65: Change The Hydraulic Fluid

    WP1624 Series Service and Maintenance Firewood Processor 12.3 Change the Hydraulic Fluid 12.3.1 Change the Hydraulic Return Fluid Filter CAUTION! The hydraulic return filter is located on top of the hydraulic fluid reservoir. Risk of burns to exposed skin. If the hydraulic-fluid filter gauge indicates the filter is bypassing,...

  • Page 66: Engine Maintenance

    WP1624 Series Service and Maintenance Firewood Processor 12.4 Engine Maintenance For full engine maintenance information, see the engine manufacturer's manual. 12.4.1 Engine Maintenance Safety WARNING! Do not operate the engine indoors. Park the machine outdoors in a position where the prevailing winds blow the exhaust away from you.
  • Page 67 WP1624 Series Service and Maintenance Firewood Processor 12.4.2 Electronic Fuel Injection System Maintenance Safety The engine has an electronic fuel injection (EFI) system that monitors the engine speed, temperature, and battery voltage. The EFI system cannot be adjusted. For more information, see Electronic Fuel Injection System Operation Safety on page 13.

  • Page 68: Battery

    WP1624 Series Service and Maintenance Firewood Processor 12.5 Battery 12.5.4 Charge Be familiar with procedures for charging and testing a battery. Review the safety information on page 12. Read and follow the manufacturer’s instructions for the battery charger. WARNING! WARNING! Do not let metal objects touch the battery terminals.

  • Page 69: Axles And Suspension

    IMPORTANT! Refer to the Oregon® Mechanical Timber Handbook for instructions to sharpen the saw chain. This 00356 manual is available on the Wallenstein website under Support>Manuals. Fig. 82 – Axle 1. Spindle 4. Torsion Bar 2.
  • Page 70 WP1624 Series Service and Maintenance Firewood Processor 12.7.2 Remove or Replace the Saw Chain 3. Turn adjusting screw counterclockwise to loosen chain so it can then be removed. A tool is provided in the toolbox for the bar nuts and bar chain tensioner.

  • Page 71: Adjust The Infeed Conveyor Chain Tension

    WP1624 Series Service and Maintenance Firewood Processor 12.7.4 Chain Saw Lubrication The chain saw (saw chain and guide bar) must receive sufficient lubrication to prevent excessive chassis wear. The chain saw is equipped with an automatic bar oiler that starts when the chain saw is activated.

  • Page 72: Adjust The Live Deck Drive Chain Tension

    WP1624 Series Service and Maintenance Firewood Processor 12.10 Adjust the Live Deck Drive Chain Measure conveyor chain slack from the topside. Pull the chain up by hand at the middle and measure distance 'X'. Tension Measurement should be 1-1/2" (4 cm). Adjust accordingly.
  • Page 73 WP1624 Series Service and Maintenance Firewood Processor 12.11.2 12 ft Conveyor Grease Points IMPORTANT! Do not over grease. Pumping more than one pump from a grease gun into the bearings can cause the seals to leak grease. This can damage the seals and reduce their effectiveness.

  • Page 74: Ft Conveyor Maintenance

    WP1624 Series Service and Maintenance Firewood Processor 12.12 24 ft Conveyor Maintenance Complete the following maintenance to keep your conveyor in good condition. 12.12.1 24 ft Conveyor Maintenance Schedule As Required Remove any entangled material from conveyor. Check that all fasteners are tight.
  • Page 75 WP1624 Series Service and Maintenance Firewood Processor 12.12.3 Adjust the 24 ft Conveyor Chain Grease Points Tension Location – Every 50 hours of operation or annually IMPORTANT! The purpose of chain adjustment is to remove slack from the chain. It is easy to over tighten the chain, so...

  • Page 76: Electrical System

    WP1624 Series Service and Maintenance Firewood Processor 12.13 Electrical System IMPORTANT! When assembling or replacing wire harnesses, apply a thin coating of silicone dielectric grease to the harness connectors. Clean off any corrosion or loose particles, then apply a small amount to the surfaces of the connectors where they meet.

  • Page 77: Troubleshooting

    Safety on page 8. Set the machine to a safe this information, please contact your local dealer, the distributor, condition. or Wallenstein Equipment. When you contact someone, please have the serial number of your product available. To find the For engine troubleshooting, see the engine manufacturer's serial number on your machine, see Serial Number Location on manual.

  • Page 78: Conveyor Troubleshooting

    WP1624 Series Troubleshooting Firewood Processor Problem Cause Solution Saw overheating; harder to cut. Saw chain is dull. Sharpen or replace chain. Bar oil is low Add oil. Chain tension too loose. Adjust chain tension. Bar oiler not working. Move oil reservoir to gravity feed mounting position on chain saw guard.

  • Page 79: Specifications

    WP1624 Series Specifications Firewood Processor 14. Specifications For engine specifications, see the engine manufacturer's manual. For available accessories, go to WallensteinEquipment.com. 14.1 Machine Specifications Parameter WP1624 Engine Vanguard® 40 hp (993 cc) EFI Hydraulic Pump 14 US gpm (53 Lpm) / Stage 1 7.75 US gpm (29.3 Lpm) / Stage 2...

  • Page 80: Conveyor Specifications

    WP1624 Series Specifications Firewood Processor Parameter WP1624 Live Deck Width 6'–0" (182 cm) Saw Bar and Chain Oregon® 25" (64 cm) harvester bar 18HX 0.404 chain, electric bar oiler Saw Drive Hydraulic gear motor Through-put 1 ½ – 2 ¾ cords an hour Full Stroke Splitting Cycle Time 6½...

  • Page 81: Machine Dimensions

    WP1624 Series Specifications Firewood Processor 14.3 Machine Dimensions 5'–10.25" (1.78 m) 8'–9.19" (2.67 m) 19'–3.5" (5.88 m) Fig. 99 – WP1624 Dimensions...

  • Page 82: Ft Conveyor Dimensions

    WP1624 Series Specifications Firewood Processor 14.4 12 ft Conveyor Dimensions 2’-11” ( 0.89 m) 11’-11” (3.63 m) 6’-11” (2.11 m) Fig. 100 – 12 ft Conveyor Dimensions...

  • Page 83: Ft Conveyor Dimensions

    WP1624 Series Specifications Firewood Processor 14.5 24 ft Conveyor Dimensions 6’-2” (1.88 m) 21’-8” ( 7.8 m) 14’-6” (4.42 m) Fig. 101 – 24 ft Conveyor Dimensions...

  • Page 84: Bolt Torque

    WP1624 Series Specifications Firewood Processor 14.6 Bolt Torque Imperial Bolt Torque Specifications Torque IMPORTANT! If you replace hardware, use fasteners of Bolt the same grade. SAE Gr. 2 SAE Gr. 5 SAE Gr. 8 Diameter lbf•ft N•m lbf•ft N•m lbf•ft N•m...

  • Page 85: Hydraulic Fitting Torque

    WP1624 Series Specifications Firewood Processor 14.7 Hydraulic Fitting Torque Hydraulic Fitting Torque Specifications Tighten flare-type tube fittings: Hex size Tube size across Flats from finger 1. Check the flare and flare seat for defects that might flats Torque tight cause leaks.

  • Page 86: Warranty

    Warranty Firewood Processor 15. Warranty LIMITED WARRANTY Wallenstein products are warranted to be free of defects in materials and workmanship under normal use and service, for a period of Five Years for Consumer Use Two Years for Commercial/Rental Use from the date of purchase, when operated and maintained in accordance with the opera�ng and maintenance instruc�ons supplied with the unit.

  • Page 87: Index

    WP1624 Series Index Firewood Processor 16. Index Conveyor Components 12 ft Conveyor ��������������������������������������������������������������� 29 Adjust the Wedge Height ���������������������������������������������������� 54 24 ft Conveyor ��������������������������������������������������������������� 30 Advance the Log ����������������������������������������������������������������� 54 Conveyor Height, Change ��������������������������������������������������� 41 Air Filter, Clean�������������������������������������������������������������������� 67 Conveyor Maintenance 12 ft ����������������������������������������������� 72 Alert Symbol ��������������������������������������������������������������������������...
  • Page 88 WP1624 Series Index Firewood Processor Gauge Operating Instructions Chain Saw Hydraulic Pressure �������������������������������������� 32 Advance the Log ������������������������������������������������������������ 54 Hydraulic-Fluid Filter ������������������������������������������������������ 34 Connect Hydraulic Lines ������������������������������������������������ 41 Splitter Hydraulic Pressure �������������������������������������������� 32 Cutting ��������������������������������������������������������������������������� 51 Grease �������������������������������������������������������������������������������� 62 End of the Log ��������������������������������������������������������������� 55 12 ft Conveyor Grease Points����������������������������������������...
  • Page 89 WP1624 Series Index Firewood Processor Saw Chain Bar Oil Flow Rate����������������������������������������������������������� 53 Tachometer and Hour Meter Display����������������������������������� 33 Loosening ���������������������������������������������������������������������� 52 Throttle control �������������������������������������������������������������������� 33 Lubrication ��������������������������������������������������������������������� 71 Tighten the Drive Chains Maintenance ������������������������������������������������������������������ 69 Live Deck ����������������������������������������������������������������������� 71 Remove / Replace ��������������������������������������������������������� 70 Live Deck Drive��������������������������������������������������������������...
  • Page 92 WallensteinEquipment.com...

Table of Contents