1.1. Retention of documents SEEBACHER cannot accept any liability for damage or malfunctions 1.2. Symbols used resulting from failure to observe these instructions.
The module must not be used in the following cases in particular: with the technical regulations, instructions and recommendations. explosive area SEEBACHER shall not be liable for any costs or damage incurred • When operating in explosive areas, sparking can lead to deflagra- by the user or third parties as a result of the use of this equipment, tion, fire or explosions.
Switch off the power supply, check that there is no voltage, secure against being switched on again! The device may only be operated at voltages according to the tech- Seebacher GmbH nical data and loaded with the currents defined therein. Only use sui- Marktstrasse 57 table equipment (system modules).
-25°C to +70°C Humidity 0-85% r.h. non-condensing Protection class IP 30 CE mark Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2...
Page 6
Free Note: Galvanic isolation in the module and jumper settings only realised from version 2.0. View 102.00mm 30.00mm Seebacher GmbH www.seebacher.de Phone: +49 (0) 80 41 / 77 77 6 Marktstrasse 57, 83646 Bad Tölz info@seebacher.de Fax: +49 (0) 80 41 / 77 77 2...
Page 7
+24V BUS-A BUS-B Address RJ45 1 2 3 4 5 6 7 8 ISYGLT RS232-GW-03 A r t . n o . : 80087022 9-pol. SUB-D socket Sp ec ia l p ro t oc ol I ntru si on a l ar m c en t re Misprints and technical changes reserved.
Need help?
Do you have a question about the ISYGLT RS232-GW-03 and is the answer not in the manual?
Questions and answers