Page 2
ASSEMBLY AND USE OF A DARKFIELD CONDENSOR FOR EUROMEX ISCOPE INSTALLATION AND SETTING 3. Lower the condenser slightly, place the slide. In 1. Remove brightfield condenser this way, the immersion oil should not yet touch the unwinding the screw marked with the arrow. Set...
Page 3
6. Center the condenser with the 7. The condenser is now ready for use screws of the condenser 8. To use the 100x lens and/or the special 100x lens with built-in iris aperture, you must also put immersion oil on the prepared slided 9.
Page 4
Management System ISO 9001:2015 Euromex Microscopen bv • Papenkamp 20 • 6836 BD Arnhem • The Netherlands • T +31 (0) 26 323 22 11 info@euromex.com • www.euromex.com All information may be changed without prior notice • v.023461 ID 0000037140...
Need help?
Do you have a question about the iScope Darkfield and is the answer not in the manual?
Questions and answers