Sony NEX-F3 Handbook page 77

Auto Port. Framing
When the camera detects and shoots a face, the captured image is automatically trimmed
into a suitable composition. Both the original and the trimmed images are saved. The
trimmed image is recorded with the same image size as that of the original image.
1 MENU t [Camera] t [Auto Port. Framing] t desired mode.
turns to green when the camera judges that the trimming feature is available.
A frame that shows the trimmed area is indicated on the auto review screen after the shot.
(Off)
(Auto)
Notes
• You cannot use [Auto Port. Framing] with the following functions:
– [Hand-held Twilight], [Sports Action] in [Scene Selection]
– [Anti Motion Blur]
– [Sweep Panorama]
– [3D Sweep Panorama]
– [Soft Focus] [HDR Painting] [Rich-tone Mono.] [Miniature] in [Picture Effect]
– [RAW] or [RAW & JPEG] in [Quality]
– [Auto HDR] in [DRO/Auto HDR]
– The [Zoom] feature of the camera
– When [Face Detection] is set to [Off]
• The trimmed image may not be the best possible composition, depending on the shooting conditions.
Does not use the Auto Port. Framing function.
Uses the Auto Port. Framing function.
GB
77