THOMSON DPL915VD-RADIO Manual

Operating the Radio
The receiver has a built-in tuner that allows for FM/MW/LW
radio function.
NOTE
The remote control selector must be set
on hifi.
Manual tuning
1. Connect the FM and AM antenna accordingly (see
"Connecting the Antenna" on page 5 section for details)
2. Press POWER on the main unit.
3. Press SOURCE until tuner mode is selected or press
tuner on the remote control.
SOURCE SURROUND
/ ECO
- +
PRESET PRESET
4. To select band, press the BAND/APP on the main unit or
tuner button on the remote again to toggle between FM
stereo / FM mono / MW / LW / FM stereo mode.
When an FM station broadcast Stereo sound, ST is
displayed.
BAND/APP TREBLE
D I G I T A L
RPT/PGM
- +
TUNE TUNE
POWER / ECO
SAT/
CAB
VIDEO/
ok
VCR
SAT/
CAB
VIDEO/
ok
VCR
5. Tune the stations by pressing TUNING + or - on the
main unit or UP or DOWN arrows on the remote control
repeatedly until the desired station is found.
Alternatively, you can press and hold the respective buttons
for about one second to activate the automatic SEARCH
function. In this mode the receiver will automatically tune
frequencies until it finds a station
BAND/APP TREBLE
T A L
RPT/PGM
- +
TUNE TUNE
DVD D I G I T A L
PRO.LOGIC
VCD
INTRORANDOM
CD
MP3
6. Repeat steps 5 to tune another radio station.
Select sound effect if needed by pressing SURROUND or
theater mode sound (see "Advance sound section" on
page 15 and 16 for details)
mp3
SOURCE SURROUND
- +
PRESET PRESET
NOTE
1. If there is interference, modify the location
of the antenna until the optimal sound is heard.
TV and other electronic devices could be the
cause of interferences so try to position the
antenna away from them.
2. Weak signal can affect the "auto Search
function". Adjust the antenna for better recep-
tion for more efficient search.
Radio
TV
SAT/
CAB
VIDEO/
ok
VCR
L C R
LS LFE RS
TV
SAT/
CAB
VIDEO/
ok
VCR
37
EN