Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Castellari RY100
- Page 1 RY100...
-
Page 2: Table Of Contents
4.2. Set-aside ..........................14 4.3. Dismantling of machines ....................... 14 ERROR ENCODING ....................... 14 5.1. Spare parts..........................14 WARRANTY CONDITIONS ..................... 14 6.1. Disclaimer of Warranty ......................15 Declaration of Conformity ....................15 Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 3: Description Of The General Characteristics Of The Hacksaw
This manual contains the necessary instructions for the correct and safe use of the RYNO Series electric pruner, hereinafter also referred to as the "machine", distributed by Castellari S.r.l., of Imola (BO). Before using the machine, it is important to read and carefully follow the instructions in this manual, as the regular operation and durability of the machine itself depends on the observance of the instructions given, together with correct maintenance. -
Page 4: Subject To Whom The Manual Is Addressed
Be careful not to use the machine in environments with an explosive atmosphere! Due to the use of electrical components, do not use in bad weather or thunderstorms. Prohibition of placing or approaching heat sources Prohibition of exposure to the sun or hot surfaces Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 5: Protection & Safety Devices
Hand-to-arm vibration level: 2.23 m/s² 1.7.3. Cut risk Cut hazard Despite the fact that all safety regulations have been applied to the construction, it has not been possible to eliminate the risk of cutting. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 6: Ry100 Components
RY100 1.8. RY100 Components Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... - Page 7 ST2*8 screw Oil outlet cylinder pin Chain cover knob Chain cover knob seat Chain cover axle Circlips Tightening screw Tightening nut 29 Link Chains 4 inch Chain bar ST3*12 screw Gearbox seal ring Castellari s.r.l. via Lasie 15/a Imola (BO), Italy...
-
Page 8: Ry100 Component Specification
Machines may only be used for the purpose for which they were designed. The machines must not be operated with the guards disassembled and the casings must not be removed or disengaged. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 9: Safety In Use And Maintenance
Operate the hacksaw in accordance with the instructions in the manual. Hold the side of the cut opposite the user. Cut only when the chain reaches full speed. Use the crankcase support as a fulcrum to have a firm cutting position. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 10: Traction Warning Instructions
Adjustments, with safety devices disengaged or without a casing, must be made by a single operator; During these operations, access to the machine is forbidden to non-employees. Avoid dust deposits on the machine, especially on the electric motor and electrical parts. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 11: Electrical Safety
During the start of the machine, the oil automatically comes out of the tank, lubricating the chain. Once you have run out of oil in the tank, turn off the machine before filling. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 12: Preparing For Use
The machine is equipped with a safety button to be pressed at the same time as the chain link start trigger, once started, release the safety button. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 13: Using The Battery Charger And Charging The Battery
They may vary depending on the way the machine is used and in relation to the characteristics of the environment in which it is used, e.g.: humidity level, air cleanliness (presence of dust). Under heavy use, it may be necessary to increase the number of maintenance visits. Castellari s.r.l. via Lasie 15/a Imola (BO), Italy... -
Page 14: Set-Aside
Repairs or specialist maintenance must be carried out by specialized and authorized Castellari personnel. WARRANTY CONDITIONS Castellari srl guarantees the brand new product for a period of 24 (twenty-four) months from the date of purchase. NB: At the time of purchase, check that the machine is intact and complete in its components. Any complaints must be submitted within 7 days of receipt of the machines. -
Page 15: Disclaimer Of Warranty
I, the undersigned Castellari Enrico, president of Castellari S.r.l., "Construction of scissors for agriculture", Via Lasie 15/a – 40026 IMOLA (BO) ITALY, declare under my sole responsibility that the RY100 hacksaw comply with the essential safety and health protection requirements of Directive 2006/42/EC of the European Parliament and of the Council. - Page 16 Via Lasie 15/A - 40026 IMOLA (Bo) Tel.39 0542.43659 - +39 0542628142 +39 0542 626930 www.castellarisrl.com - info@castellarisrl.com...
Need help?
Do you have a question about the RY100 and is the answer not in the manual?
Questions and answers