Download Print this page

Cambridge Casual IT-131050T Assembly Instructions

Download this manual

ASSEMBLY INSTRUCTIONS

CUSHION COVE

CUSHION COVER

HOW TO INSTAL

HOW TO INSTALL THE CUSHION COVER ON THE FOAM

FRONT

1. Bend the foam using both legs with the 'front' label facing forward,

then cut the plastic wrap.

2. Slide the foam into the cover.

3. Remove/pull the plastic wrap from the foam.

Make sure the foam is perfectly installed before closing the zipper.

Attention: It takes about 24 hours after opening from the plastic wrap

for the foam to fully expand.

Please email us at info@cambridge-casual.com for assembly tips, report damage, or request parts.

For faster response, please write down item number, code for missing parts,

attach the purchase receipt and picture of damaged parts.

Toll free number : 1-888-287-4275 from 9:00 am to 5.00pm CST (Monday to Friday).

IT-131050T

Need help?

Do you have a question about the IT-131050T and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS IT-131050T CUSHION COVER CUSHION COVE HOW TO INSTALL THE CUSHION COVER ON THE FOAM HOW TO INSTAL FRONT 1. Bend the foam using both legs with the ‘front’ label facing forward, then cut the plastic wrap. 2. Slide the foam into the cover.
Page 2 ASSEMBLY INSTRUCTIONS IT-131050T PILLOW COVER HOW TO INSTALL THE PILLOW COVER 1. Remove the plastic wrap oﬀ the foam, then slide the foam into the cover. 2. Close the zipper The pillow need to be pressed and pulled to fully expand.