Anda Tenkebo AP864015 Instruction Manual

AP864015 Tenkebo weather station
1.
Function:
 MODE: single-button switch display: time, alarm, long press "MODE" to enter the corresponding setting
mode.
UP: Adjust the set value upward during the setting state, and press the "UP" button to display the

maximum/minimum temperature and humidity in the time mode.
DOWN: Adjust the setting value downward in the setting state, and press the "DOWN" button to switch C/F

in the time mode.
 SNOOZE: When the alarm sounds, press the "SNZE" button to enter snooze mode, and the alarm will sound
after a delay of 5 minutes. (Up to 5 snoozes)
All key operations have key sounds.
2. Time setting mode:
 Switch the display status to time mode, long press the "MODE" key for more than 2 seconds, and enter the time
setting mode.
 The set item flashes.
 The setting order is: 12/24 - > hours - > minutes - > exit.
 Set the result, press "MODE" to confirm.
 Press the "UP" button alone, the setting value increases by one step, and long press for more than 2 seconds,
the setting value advances at a speed of 8 steps per second.
 Press the "DOWN" button singly, the setting value is one step back, and long press for more than 2 seconds, the
set value will go back at a speed of 8 steps per second.
 When the key is not operated within 30 seconds, the setting mode will be automatically exited, and the value
that has been set will be saved.
 Change the minute value, the second will automatically clear zero.
3. Alarm settings:
 Switch the display status to ALARM mode, long press the "MODE" button for more than 2 seconds, and enter
the ALARM setting mode.
 The set item flashes.
 The setting order is: hours—> minutes—> exit.
 Set the result, press "MODE" to confirm.
 Press the "UP" button, the setting value is increased by one step, long press is greater than 2 seconds, and the
set value advances at a speed of 8 steps per second.
 Press the "DOWN" button alone, the set value is one step back, long press for more than 2 seconds, and the set
value is retreated at a speed of 8 steps per second.
 In the alarm display mode, you can simply press the "UP" key or "DOWN" to turn ALARM on or off.
 When the key is not operated within 30 seconds, the setting mode will be automatically exited, and the value
that has been set will be saved.
4. Temperature and humidity function:
 Temperature detection range: -10 °-70 C ( 14°F-158 °F).
 Humidity detection range: 20-95%.
 Detection cycle: 60 seconds.
The product works with 2xAAA batteries (not included).
This item is in conformity with the following standards:
RoHS Directive 2011/65/EU and its subsequent amendments Directive (EU)
2015/863 Electromagnetic Compatibility (EMC) - Directive 2014/30/EU
UK Electrical Equipment (Safety) Regulations (SI 2016/1101)
UK Electromagnetic Compatibility Regulations (SI 2016/1091)
This symbol both in the product and its user manual indicates that at the end of the devices electrical life, it should
be recycled separately from your household waste. There are adequate means to dispose of this material for
proper recycling. For more information, contact your local authorities.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Instruction manual
Distributor: Cool Collection 1476, Budapest, POB:176. Hungary
Registration nr. 01-09-276783
Made in China