Page 1
MHCozy USB 5V Switch This simple remote WiFi switch can be used to remotely turn your FlexRadio on and off remotely. Using the Remote connector on the back of a FLEX-6000 radio allows for a clean shutdown of your radio.
1. Download and install the Tuya Smart Application. 2. Touch the Plus Sign and then Add Device and then power up the TYWB device. Bluetooth will have to be enabled on your phone. FlexRadio Inc. Remote Switch Guide page 2...
Page 3
Next 5. The Device will be automatically added. This may take a few minutes and you can watch the progress on the right side. Wait until you see “Added Successfully” and press done. FlexRadio Inc. Remote Switch Guide page 3...
Page 4
6. Press the “Pencil” in the top right corner to change the name of the TYWB. Once done, touch the back arrow (top left) to return to the previous screen. FlexRadio Inc. Remote Switch Guide page 4...
Page 5
10. Connect the RCA cable to Channel 1 Channel 1 is the Top Left terminal with the writing right side up. Connect 1 wire to the COM terminal and the other wire to the NO (Normally Open) terminal. FlexRadio Inc. Remote Switch Guide page 5...
Page 6
11. Connect the RCA cable to the Remote RCA connector on the back of your FlexRadio. 12. In SmartSDR for PC, under Settings, select the Radio tab. Next, ensure that Remote On is set to Enabled. Test the MHCozy Switch Open the MHCozy app or access the switch's control panel via a web browser to ensure it is now connected to your Wi-Fi network.