Les bruksanvisningen nøye før bruk, og ta vare på den for senere bruk. Bruksanvisningen ligger også på beha.no Gratulerer med din nye Beha SKO 300 T skotørker! Du har kjøpt et moderne produkt, som er enkelt å bruke og godkjent av Nemko.
1.0 Teknisk informasjon — Strømforsyning: 230V AC 50Hz — Nominell eff ekt: 300W — Strømledning: 1,8m med støpsel — Nettovekt: 1,2kg — Isolasjon klasse: 2 (dobbel isolert) — Mål (L x H x D): 23×23×10cm — IP klasse: IPX1 2.0 Sikkerhetsinformasjon Når du bruker elektriske apparater, bør grunn- etter at det er avslått.
Advarsel! Bruk ikke apparatet i små rom hvor ring med de varme overfl atene på produktet det er personer som ikke kan forlate rommet under bruk. på egenhånd, med mindre de har konstant tilsyn. Kabelen skal ikke tildekkes av matter eller lig- nende.
3.3 Montere apparatet på veggen Monteres slik at rørene er ca. 3 cm over gulvet. Appara- tet tilkobles stikkontakt i det rommet som den brukes i. Festes til veggen med 2 skruer. Skru inn 2 skruer i veggen 14.8 cm fra hverandre. Skotørkeren monteres inn på...
Page 6
6.0 Waste management Please read the user guide carefully before using the appliance and save it for later reference. This user guide is also available at beha.no. Congratulations on your new Beha SKO 300 T shoe dryer! You have purchased a modern, easy to use product approved by Nemko.
1.0 Technical information — Power supply voltage: 230V AC 50Hz — Power consumption: 300W — Cable with plug: 1,8m — Net weight: 1,2kg — Insulation class: 2 (double insulated) — Dimensions (L x H x D): 23×23×10cm — IP class: IP X1 2.0 Safety information When using any electrical appliance, basic...
Page 8
Cleaning and user maintenance shall not be Do not operate any appliance with a damaged made by children without supervision. cord or plug. The cable must not come into contact with hot surfaces of the appliance Children of less than 3 years should be kept during operation.
3.0 Installation 3.1 Electrical connection and use 3.3 Installation on wall Before connecting the appliance, please ensure that the The shou dryer is mounted so that the pipes are approx. voltage is 230V AC 50Hz. This appliance is well suited 3 cm above the fl...
5.0 Cleaning, care, and maintenance 1. Turn switch must be in OFF position. Unplug the power connection and let the shoe dryer cool down before cleaning. 2. Clean the outside with a damp cloth. 3. Never use abrasive cleaners or submerse the appliance in water or other liquid. 6.0 Waste management This appliance is marked in accordance with EU rdance with the local waste disposal regulations.
Page 11
Beha since 1917 BEHA ELEKTRO AS Evjeløkka 3 N-1661 Rolvsøy Norway beha.no A part of Beha Group AS...
Need help?
Do you have a question about the SKO 300 T and is the answer not in the manual?
Questions and answers