Table Of Contents; Introduction - Husqvarna TS 300 E Operator's Manual

Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 8
Operation........................................................................ 9
Maintenance................................................................. 13
Troubleshooting schedule.............................................14
Product description
The product is used to cut masonry and stone. The
product is operated by electric motor.
The water system supplies the blade with water.
Intended use
The product is used to cut tile, stone, block and brick.
Product overview
2
1
17
16
15
14
13
1. ON/OFF buttons
2. Handle for blade height control
3. Cutting depth lever
4. Motor
5. Locking clamp for blade housing
6. Blade (Diamond or Abrasive)
7. Blade guard
8. Water pump
9. Drain plug
10. Transport wheels
11. Rear frame legs
2
Contents

Introduction

11
12
Transportation, storage and disposal........................... 14
Technical data.............................................................. 16
Technical data TS 300 E.............................................. 17
Technical data TS 350 E.............................................. 18
Technical data TS 400 F...............................................19
Declaration of Conformity............................................. 21
The product is used in commercial operations by
professional operators. Do not use the product for other
tasks.
7
3
6
5
4
9
10
12. Front frame legs
13. Frame
14. Locking hook for the conveyor cart
15. Handle for transportation
16. Conveyor cart
17. Type plate
8
2282 - 002 - 07.02.2024