Wolf C200 Instructions

C200 WATERPROOF SPEAKER INSTRUCTIONS
SAFETY INSTRUCTIONS
Read all instructions
Only charge with devices rated and marked with 5V to avoid
damage to the speaker.
Do not open up the speaker, it voids the warranty and may
damage the product.
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles varies by use
and settings.
Never place the speaker close to high temperature heat
sources.
To keep the warranty valid, never try to repair the product
yourself.
SPEAKER FEATURES
1. Lanyard.
2. Volume down button: previous song, decrease the volume.
3. Pause button: play, pause, answer call, TWS.
4. Volume up button: next song, increase the volume.
5. Power button: power on/off, siri, reset.
6. Mode button: switch the playing mode.
7. LED indicator.
8. Micro USB port.
9. AUX IN port.
10. Bluetooth indicator.
11. Microphone.
THE SPEAKER'S BATTERY
A built-in rechargeable battery powers the speaker.
CHARGING
Connect the supplied charging cable to the charge input and
to a USB port on your computer or a USB charger. The charging
LED is lit red during charging. The LED turns off when fully
charged.It is recommended to charge 10 minutes before power
on if you 7 days unused, then you can continue to use while
charging.
6
9
POWER ON/OFF
Power on: Long press power button 3 seconds to power on the
speaker, then the Bluetooth indicator light is on and you can
connect Bluetooth devices.
Power off: Long press power button 3 seconds to power off the
speaker, and then Bluetooth indicator will turn off.
SIRI FUNCTIONALITY
Short press power button to activate SIRI ( IOS ), supports
Huawei intelligent voice assistant.
CONNECT THE SPEAKER
Turn on the speaker, the bluetooth indicator flashing white, on
your device search for Bluetooth devices. Select the speaker
from the list. It will give an indication sound and the bluetooth
indicator stays solid white when the connection is successful.
Only one Bluetooth device can be connected at the same time.
If you want to connect another device to the speaker, then first
disconnect the current one.
DISCONNECT THE SPEAKER
When it's connected via Bluetooth: long press mode button to
disconnect.
RECONNECT THE SPEAKER
Some Bluetooth devices support automatic reconnection, with
those devices the speaker will automatically reconnect.
The speaker will not automatically reconnect on devices
that does not support automatic reconnection. When it's not
connected: long press mode button to connect to the last
disconnected device.
PLAYING MODE
Short press mode button to switch different playing mode: BT,
AUX.
AUDIO CABLE CONNECTION
Power the speaker on.
Connect a 3.5 mm audio cable to the speaker and your device.
The speaker is now connected to your device.
THE PAUSE BUTTON'S FUNCTIONALITY
Short Press:
1. Music playback status: play, pause function.
2. When there is an incoming call: answer the call.
3. When you're receiving the call: hang up the phone call.
Long Press:
1. When you're calling: Press 2 seconds to reject the call.
2. Press 2 seconds to enter TWS connection, once connected,
press 2 seconds to disconnect TWS connection.
Double press:
When it's connected via Bluetooth to your phone: to call back
the last call.
CHANGE VOLUME AND SONG
When listening to music
Increase volume: Short press on the "+" button.
Decrease volume: Short press on the "- " button.
Previous song: Long press on the "-" button.
Next song: Long press on the "+" button.