Summary of Contents for Planar LRC-UPL
- Page 1 955-1004-00 LRC-UPL Installation Guide Large Rolling Cart for Flat-Panel Display up to 300lbs/136kg Planar Systems, Inc. 1195 NW Compton Drive Beaverton, OR 97006 (866) 475-2627 www.planar.com...
-
Page 2: Caution Statement
Maximum Weight Capacity: CAUTION STATEMENT PLANAR DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PLANAR PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUIT ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS. -
Page 3: Core Components
LRC-UPL Installation Guide CORE COMPONENTS: Flat-Panel Rated Weight: 300 lb. / 136 kg. Pole Adapters Cross bars Mounting Brackets Set of 4 Casters Set of 4 Casters Base Extender Brackets Extender Brackets 60” long Poles 60” long Poles INSTALLATION HARDWARE:... -
Page 4: Install The Casters
LRC-UPL Installation Guide INSTALL THE CASTERS 21 mm Wrench Soft surface Use 21mm wrench to install a pair of locking and non-locking casters. Tighten fully to prevent the casters from backing out after extended use. Insert and position the poles with cable access ports facing the rear. - Page 5 LRC-UPL Installation Guide ASSEMBLE THE POLE ADAPTER TOGETHER (8) M8 x 16mm Set the tab Buttton Hex pointing up Vertical Brackets Pole Adapter SLIDE THE POLE CLAMP ONTO THE POLES SET THE VIEWING HEIGHT AND TIGHTEN THE SET SCREWS Center...
-
Page 6: Selecting The Mounting Hardware
LRC-UPL Installation Guide SELECTING THE MOUNTING HARDWARE Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel. Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. - Page 7 LRC-UPL Installation Guide USE ADDITIONAL UNIVERSAL SPACERS TO FILL UNEVEN GAPS Each Universal Spacer adds 1/4” to the distance between the mounting bracket and the flat-panel. 1˝ ¼˝ Uneven or reccessed mounting surface Marked depth Spacers FLAT PANEL DISPLAY FLAT PANEL DISPLAY...
-
Page 8: Install The Mounting Brackets
LRC-UPL Installation Guide INSTALL THE MOUNTING BRACKETS M5, M6 Universal Washer UP arrow Center of the Center of the bracket bracket Position the mounting brackets centered to the unit. Use (4) selected screws (from Position the mounting brackets centered to the unit. Use (4) selected screws (from previous step) and universal washers to secure the brackets. - Page 9 LRC-UPL Installation Guide HOOK THE FLAT-PANEL DISPLAY ONTO THE CART WRAPPING UP INSTALLATION Post-leveling Post-leveling screws screws Center the display unit, then adjust the Center the display unit, then adjust the (2) screws on top for post-leveling. (2) screws on top for post-leveling.
-
Page 10: Product Dimension
LRC-UPL Installation Guide PRODUCT DIMENSION 44.94 1141.47 (NESTING CAPABILITY) 28.98 736.20 41.00 1041.48 35.84 40.11 910.31 1018.77 37.94 31.58 963.57 802.15 81.66 65.37 2074.13 1660.40 4.04 84.72 MAX CENTER 102.63 2151.85 VIEWING HEIGHT TUBES WITH CASTERS 2" OD 5.30 134.49 99.57...
Need help?
Do you have a question about the LRC-UPL and is the answer not in the manual?
Questions and answers