Besenzoni BUC Quick Start Manual

Download this manual

B L A C K

V E R S I O N N

Download

Besenzoni Control Device

from the APP Store

With

Besenzoni Unit Control you can use your smartphone to manage the handling of

hydraulic combined ladder/gangway Besenzoni installed on board through bluetooth technology.

It takes two simple steps:

Download the App - Besenzoni Control Device

compatible with the device's operating system: IOS10.0 or later / Android 8.0 or latere

Purchase

- Besenzoni Unit Control (receiver/adaptor Bluetooth)

To identify which bluetooth receiver/adaptor is compatible with the combined

ladder/gangway being used it is essential to provide some information:

State the combined ladder/gangway serial number indicated

in a plaque under the ladder.

If possible state the circuit board Code:

eg. C608SB

these codes correspond

to the

7FF99619 WHITE VERSION

interface for combined ladder/gangway

eg. RSP

this acronym corresponds

to the

7FF99618 BLACK VERSION

for combined ladder/gangway.

from the Appstore and check if the App is

Need help?

Do you have a question about the BUC and is the answer not in the manual?

Page 1 Besenzoni Control Device from the APP Store With Besenzoni Unit Control you can use your smartphone to manage the handling of hydraulic combined ladder/gangway Besenzoni installed on board through bluetooth technology. It takes two simple steps: Download the App - Besenzoni Control Device from the Appstore and check if the App is compatible with the device’s operating system: IOS10.0 or later / Android 8.0 or latere...
Page 2 WARRANTY BUC WHITE VERSION COD. 7FF99618 COMBINED Besenzoni provides a warranty for the product in compliance with the legislation in force. In case of dispute: LADDER/GANGWAY MODELS SP 602 / SP 607 / SP 608 a) for Italian customers, the Italian law will apply and the Court of Bergamo will be competent.
Page 3 If you want to add the management of a second device In order to correctly control the combined LADDER/GANGWAY, you must press (eg to move both the Besenzoni combined ladder/gangway and passerelle) you can do this simply and hold the selected command, otherwise an Error message by entering the drop-down menu in the settings section and clicking on “add new device”;...
Page 4 RESET FUNCTION: You can reset all the devices stored through the “Reset device” function in the settings menu. 4 button control panel Cable with SPLIT LADDER/GANGWAY 4P Connector ELECTRONIC JUNCTION +12V o 24V +12V o 24V blue LED...