Pro Spot IH-5200 Instruction Manual

Induction heater

Hide thumbs

page of 12

/ 12
Bookmarks

Quick Links

Download this manual

INDUCTION

HEATER

IH-5200

Instruction Manual

Version 1.0

Need help?

Do you have a question about the IH-5200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pro Spot IH-5200

Page 2 Pro Spot training and services Pro Spot Distributors and Sub-Distributors are carefully selected and are well trained in the collision repair industry. We o er technical and service education at our world wide training facilities at regular intervals so your local distributor will always be up to date and able to pass on the latest in spot welding technology to our custom- ers.
Page 3 4.7.4.2 Alert Indicators 4.7.5 Advanced Set-up 4.7.6 Battery Test 4.7.7 Restore Defaults 4.8 Checking Weld Quality 4.9 Cheking Battery 4.9.1 Checking the Battery Voltage 4.9.3 To Remove Side Panel Covers for Service Notes All Info Copyright © Pro Spot International Inc.
Page 4 Do not operate the unit on a slope of more than 10°. 1.2 GENERAL The IH-5200 has been designed and is tested to meet strict safety requirements. Please read the following instruction carefully before operating the unit and refer to them as needed to ensure the continued safe operation of the machine.
Page 5 WARNING! All service and maintenance ATTENTION! Tout le service et l'entretien doivent être must be carried out by Pro Spot service effectués par personnel et soutien de service Pro personnel and service support. Risk for Spot.
Page 6 SAFETY 1.4 COOLING SYSTEM BEFORE HEATING The IH-5200 is water-cooled all the way to the head of the torch. This protects the tool from being Unscrew to remove damaged and prolongs the life of consumables. the back panel IMPORTANT! The IH-5200...
Page 7 GETTING STARTED 2.3 TROUBLESHOOTING The IH-5200 has several alerts built into its software that allow simple diagnosis of any problem you may be having. 2.3.1 COOLING SYSTEM ALERT This error indicates that there is a problem in your cooling system. It means that there is no coolant owing through the system.
Page 8 2.2 OPERATION Now that you have the correct power connection, lled the coolant tank, and familiarized yourself with the user interface, you are now ready to turn on the IH-5200. Turn the Input Breaker to the ON position. 2. Rotate the Heat Control button clockwise to increase the heating power. Rotate the Heat Control knob counter-clockwise to decrease the heating power.
Page 12 Pro Spot International, Inc. 5932 Sea Otter Place Carlsbad, CA 92010 Toll Free: (877) PRO SPOT Phone: (760) 407-1414 Fax: (760) 407-1421 E-mail: info@prospot.com Web: www.prospot.com Copyright © ProSpot International, Inc. 2016...