Related Manuals for Safety Track ST-401
Summary of Contents for Safety Track ST-401
- Page 1 ST- 401/801 Standard Installation Guide A detailed guide on how to install your new fleet management system Version 1.8 1/2022...
- Page 2 Review packing list or “whats in the box” to make sure you have everything. NOTE: Any modifications to the device or software outside of company standards without company approval are not a responsibility of Safety Track and will void the warranty.
- Page 3 Be sure to download both, our Installation Asset These Tools Can Help! app and Fleet app below. Available on the Apple App store and Google Play Store. -Volt Meter -Wire Crimpers Safety Track Asset App: -Wire Strippers -Electrical Tape Apple: (Tap here) -Zip Ties -Self Tapping Screws...
- Page 4 2. Standard Installation Steps: Step 1: Placement Locate where you intend to mount the MDVR. A common location is inside the glove compartment. Keep in mind that all cameras, antennas and accessories will be powered by the MDVR. Step 2: Locate Power Source If you have 12V wiring experience you probably already have a location in mind.
- Page 5 Step 3: Mounting Cameras and Accessories Safety Track Appointed Professional Installers: You will have been given direction as to which camera type goes where on each vehicle. Please follow as instructed, if any complications arise contact support at 734-325-6060 or support@safetytrack.net Valued Customers: Camera mounting locations should have already been discussed with your Sales rep.
- Page 6 See below for recommended camera mounting locations based on camera type. ST-10C: Designed to be placed on the windshield and face forward toward the road. Two adjustment points on this camera, one to tilt and one rotates the cam. ST-11C: Designed to be placed on the windshield and face in toward the occupants.
- Page 7 Accessory Connections: A - GPS Antenna B - 4G Antenna C - Accessory Harness (If applicable) The GPS antenna (A) and 4G antenna (B) should be mounted on the upper or lower, far right or far left side of the windshield. This will ensure a great signal with a clear view to the sky.
- Page 8 Place the Microphone so that it is visible and in an optimum position to get the best clarity. Pictured right is a recommended placement example. Driver side A-Pillar, this way it is near the driver. Step 4: Verification: Ensure proper connection by checking the lights on the front face of the MDVR. It may take a few seconds for lights to appear once you connect power.