RVLock ANKR Installation Manual

Quick Flag Mount
Prepare the area
01
A. Thoroughly clean the surface you
intend to mount. If not properly
cleaned, your mount will not correctly
attach.
B. Using a wet rag, dampen the RV
surface and suction cups. The more
wet these surfaces are, the better the
bond.
Install ANKR Quick
02
Flag Mount
A. Press the ANKR firmly against the
clean, wet surface.
B. Secure the ANKR by locking the
suction levers.
TIPS:
Always remove the ANKR before traveling or
during heavy wind storms.
Factors such as sudden changes in temperature
can impact the ANKR bonding process.
Always be aware of what is below your flag
mount in case the ANKR loses suction to your
intended surface.
INSTALLATION
www.RVLOCK.com
SCAN FOR VIDEO GUIDES