Turbo Greenland GLH20WIFI - Humidifier Manual

GETTING TO KNOW YOUR HUMIDIFIER

PRODUCT DETAIL

3 Different Nozzles

Remote Control

PRODUCT STRUCTURE

1. Sink
2. Atomizer
3. Remote Control Holder
4. UV Lamp
5. Power Cord
6. Air Outlet

7. Water Filter
8. Water Tank
9. Wheels
10. Nozzle
11. Cover
12. Mist Cover

SPECIFICATIONS

GETTING STARTED

PLACEMENT
This humidifier should be placed on a firm floor and at least 19 inches of space away from walls, furniture, furnace, household appliances, etc.
Please do not use it on the following occasions to avoid water leakage, signal interference or injury, etc.

1. Direct sunlight.
2. On an unstable platform.
3. With high temperatures, humidity, and/or dust.
4. Near an air conditioner, furnace, heater, or stove.
5. Near mobile phones, computers, and other precision instruments. Near the radio and other objects that emit radio waves.

TWO WAYS TO ADD WATER
Note: We recommend using purified or distilled water to fill the tank to prevent white mineral buildup.

1. Take out the body and add water into the tank. This is the recommended way.
   
2. Open the cover and add the water directly into the tank.
   

REMOTE CONTROL
The battery is included in the remote control.

1. Replace the battery: Press and pull out the battery ring. Put a lithium 1 battery CR2025+ on the top.
   
2. Operation: Use the remote control within 13 feet of the humidifier.
   

USING YOUR HUMIDIFIER

PANEL

	Touch this button to turn on the F machine. The LED display shows the current humidity and temperature (the display switches every minute). Note: This humidifier has power-o memory function. The present settings will be saved and the preset operation will resume when the power is on again. When the atmosphere lamp lights up, the pump starts to draw water from the tank up to the atomizer. It takes 2.5 minutes to draw up water. During this time, no functions can be operated. After that, the machine will start to work under the default setting. (The machine uses level 2 by default. )
	Touch this button to select the mist spray level from 1 to 3.
	The humidity setting range is between 45-95% in increments of F 5%. Press the humidity button until the desired humidity is reached. It will blink for 3 seconds and then set at that humidity level. This humidifier will automatically stop spraying mist when the surrounding humidity reaches the set value. If the surrounding humidity is lower than the set value, the machine will resume working.
	The timer can be set for 1-12 hours F in increments of 1 hour. The humidifier will turn o automatically when the time reaches the set value. The timer function can not be set up when the machine is lacking water.
	Long press this button on the panel for 3 seconds or press the sleep button on the remote to enter sleep mode. The display and atmosphere light will be off. Press any button to wake the panel.
	Touch the UV button to turn on/o the sterilization feature. Do not open the cover if the UV lamp is on.

UV Lamp Sterilization

UV-C LED Light (12V DC)

Wavelength: 240nm Rated Power: 1.5W

The LED UV-C light is rated at 8000 hours.

1. This function will not produce toxic or harmful by-products, and will not affect the water quality.
2. The UV lamp has high efficiency in removing harmful bacteria.
3. The disinfection effect is influenced by water temperature (Ideal water temperature is 59-77^oF).
4. Low power consumption.

Precautions for use
This machine contains a UV device. Failure to use the device or damage to the UV lamp cover may cause hazardous UV-C radiation escape. The UV-C radiation can cause damage to the eyes and skin even at very small amounts.

1. It is forbidden to open the tank when using UV exposure, so as not to harm the eyes and skin of people or animals.
2. The turbidity and suspended solids in water have a large effect on the UV sterilization, which will affect UV light effectiveness and the sterilization effect. To prevent reducing the disinfection effect, please clean the sink and replace clean water regularly.
3. Be sure the UV light cover is intact before using the device.
4. If the UV lamp is damaged, stop using the device. Contact our customer service or a professional to repair it before continuing use.
5. Be careful to prevent damage to the UV lamp when cleaning or using the machine.

Press this button on the panel for 3 seconds or press the auto button on the remote to F enter the auto mode. This mode will adjust the mist spray level automatically according to the ambient humidity, and the brightness of the display will reduce by 50%. Press any key beside on/o to exit this mode.

In this mode:

	Touch this button to turn on/o the atmosphere lamp. Atmosphere lamp settings: cycle, red, yellow, blue, pink, green, white, and off.
	Press this button on the panel for 3 seconds or press the water level light button on the remote to turn on/o the water level indicator light.
	When the water level is too low, it will make a 5 seconds indication sound. The water shortage icon in the display will light up red and the machine will turn o automatically. All selected functions will turn o together. Please unplug the power plug and refill

When the water in the tank is not enough to be drawn up, the pump will spin, and make noise for around 3-5 seconds. At this time it is best to turn o the unit and refill the water again.

CONNECTION
Entering the Wi-Fi connection mode
Preparation before connecting preparation:
Make sure your Wi-Fi router supports 2.4GHz (NOT 5GHz) and 802.11b/g/n bands.
Note: Most 5GHz routers can also be set to 2.4GHz band or dual band.
Make sure the Wi-Fi name and password are correct.
A smartphone or tablet supporting a 2.4GHz network.
Download the App named AIR.ai from the App Store(iOS devices) or Google Play (Android devices).

1. Long press the on the control panel, and the on the screen will blink quickly.
   
2. Connect your phone to the 2.4 GHz network your humidifier will use.
   Open AIR.ai and tap the "+" icon in the top right corner.
   It will appear an added page, click "Go to add".
   
3. Go to the next step.
   Enter the password of your Wi-Fi network when prompted (same Wi-Fi network on which your smartphone is connected) and then click confirm.
   
   
   The humidifier must be connected to a 2.4 GHz Wi-Fi network. If your router (internet box) broadcasts 2 Wi-Fi bands (2.4GHz and 5GHz), consult your router user manual to learn how to select the 2.4 GHz Wi-Fi band.
4. Your device is now connected successfully. You can find the humidifier in the device list.
   

CONTROL
APP

Filter Impurities in Water
The filter ball is a mineral stone, which improves the water quality, increases water activity, and adjusts the pH of water. This water filter is recommended to be replaced every 6 months.

MAINTENANCE AND CLEANING

• Before cleaning, please be sure the machine is powered off and unplugged.
• Clean all the parts with a soft cloth. Never use any hard objects or abrasives to avoid any damage.
• Change the water in the tank and the sink every day to prevent bacterial growth.
• Do not use chemical detergent for cleaning.
• Keep the machine dry and tidy when not in use for a long time.
• The water filter is suggested to be changed after 6 months of use.

ATTENTION:

• This machine requires pure water below 113°F only, and uses it at room temperature between 41 to 104°F.
• When the room temperature is lower than 32°F, please pour out the water in the water tank and the sink to avoid freezing and damaging the machine.
• Make sure the water level is not over the Max line in the tank.
• If this unit is not in use for a long time (more than 24 hours), please pour out the water in the water tank and the sink to prevent mold or impurities from harming your health.
• Do not put essential oil into the main body/water tank, which may cause water leakage deformation or damage.
• If accidents happen, such as the machine falling down, or water going inside the unit, please unplug the machine and let it dry, then contact our after-sale service via support@turbro.com or call at (323) 438-3334.
• This machine is for indoor use only. This machine is not suggested to use on the wooden floor in case of any damage by moisture.
• The floor in front or surrounding can become slippery. Take extra caution if you have wooden floors or carpets susceptible to mold.

Descaling
After long-term use, there will be a scale deposit on the mechanical sink and vibrating piece. The scale will reduce the atomization effect. Therefore, it is recommended to clean the scale in the sink and the vibration piece every week.

1. Before cleaning, please make sure the machine is powered off and unplugged.
   
2. Pour a scale-removing liquid (e.g. white vinegar) into the water tank, then add warm water of about 140°F. Let the liquid completely dissolve and soaked for 5-10 minutes.
   
3. Clean the dirt on the wall of the sink and the vibrating plate with a soft bristle brush or a clean soft cloth.
   
4. Pour out the water. Be careful to prevent water from entering the base from the air outlet, which may cause the circuit board to short-circuit and damage.
   

TROUBLESHOOTING

CUSTOMER SUPPORT
We are here to help anytime!
Any problems, write to us via support@turbro.com. We will get back to you within 1 business day.


www.turbro.com