There is no steam or there is
little steam.
The red "water
tank empty" light is on.
Steam escapes from the rinse
plug.
Steam or water escapes
under the appliance.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert help and
10
The water tank is
empty (red light on).
The steam output control dial is
set at minimum.
The soleplate temperature is set to
the maximum.
The water tank is empty.
The rinse plug has not been tightened
correctly.
The rinse plug seal is damaged.
The generator is faulty.
advice: 0845 602 1454 - UK
(01) 461 0390 - Ireland
or consult our website - www.tefal.co.uk
Fill the water tank.
Increase the steam output (control dial on the
control panel).
The generator is working but steam is very hot and
dry As a consequence, it is less visible.
Fill the water tank.
Tighten the rinse plug correctly.
Contact an Approved Service Centre to order a new
rinse plug seal.
Stop using the generator and contact an Approved
Service Centre.
Need help?
Do you have a question about the EXPRESS STEAM GENERATOR and is the answer not in the manual?