Transportation And Unpacking; Mounting And Commissioning - Zuwa SOLARCHECK MOBILCENTER P80 Operating Instructions Manual

Danger of scald burn due to high media temperature
> Fill the solar system only when cold – if necessary cover the solar
collectors.
Danger
Danger of burn due to hot motor casing
> Do not block neither suction nor pressure hose more than 1 minute
to avoid overheating of the motor.
Danger of injury due to splashing liquid
> Connect the hoses tightly to the pump.
Warning
Material damage due to dry running
> Never allow the pump to run dry for more than 1 minute.
Caution
Material damage due to tilting of the cart on uneven ground
> Operate the filling unit only on even ground.
Danger of environmental damage due to hazardous pumped media
> Collect escaping pumped media and dispose of according to the
locally applicable regulations.
Material damage due to improper storage
> Prior to extended periods of pump down time clean pump to avoid
adhesions and damage to the impeller.
> Store pump under frost-protected conditions.

3. Transportation and unpacking

> After unpacking, immediately check the filling unit for completeness and damage.
> Immediately report any transit damage to the supplying company.
> Dispose of packaging material according to the respective local regulations.

4. Mounting and commissioning

You can find detailed video instructions for installation
and start-up at https://youtu.be/X-T66GJ18Ko or as
step-by-step instructions on the following page.
Scanning the QR code will take you directly to the
video!
ZUWA Solarcheck Mobilcenter
15