Table of Contents
Advertisement
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1. Power
2. Analog (D-Sub 15-Pin VGA cable)
To protect equipment, always turn off the PC and LCD monitor before connecting.
1
Connect the power cable to the AC port on the back of the monitor.
2
Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
12
Advertisement
Table of Contents
