Summary of Contents for TOOL FRANCE TFP-75-605
- Page 1 9 Rue des Pyrénées, 91090 Lisses France Téléphone: 01 69 11 37 37 Manual Model TFP-75-605 Belt Grinding Machine...
- Page 2 Téléphone: 01 69 11 37 37 hereby declares that TFP-75-605 Belt Grinding Machine is manufactured in accordance with the provisions of the COUNCIL DIRECTIVE of 17. May 2006 (2006/42/EC) – The Machinery Directive (order no. 561 of 25 June 1994 with subsequent amendments)
-
Page 3: Table Of Contents
1.3 P LACING 2. DIRECTIONS 2.1 O PERATION 2.2 S AFETY RULES FOR STATIONARY POWER TOOLS 2.3 M AINTENANCE 3. SPARE PARTS LIST 3.1 D TFP-75-605 RAWING OF RINDING ACHINE 3.2 S TFP-75-605 PARE ARTS IST FOR RINDING ACHINE 4. TECHNICAL DATA 4.1 T... -
Page 4: Transport & Handling
1. Transport & Handling 1.1 Transport The TFP-75-605 belt grinding machine is packed in protective wrapping and delivered on a pallet with the following measures: 120 x 80 x 120 cm 1.2 Handling The machine can easily be transported on the pallet on which it is delivered. -
Page 5: Directions
2. Directions 2.1 Operation After adjustment and connection, the belt grinding machine is ready for use. The grinding can take place by the contact wheel or on the surface grinding table by opening the cover (H) (see fig.: 1.1). By loosening the handle (E) the cover (I) can be opened and make grinding of long materials possible. - Page 6 8. Make workshop 9. Don’t force tool. It will do the job better and be kidproof with safer at the rate for padlocks, master which it was designed. switches, or by removing starter keys. 10. Use right tool. 11. Wear proper Don’t force tool or apparel.
-
Page 7: Maintenance
2.3 Maintenance Empty the spark box with regular intervals and control if the suction canals need a cleaning. The dust bag must be emptied after use. The contact wheel should be replaced when the edges have been worn round or the tyre has been damaged. The graphite pad on the surface grinding table is changed as required. -
Page 8: Spare Parts List
3. Spare Parts List 3.1 Drawing of Belt Grinding Machine TFP-75-605 Fig.: 3.1... -
Page 9: Spare Parts List For Belt Grinding Machine Tfp-75-605
3.2 Spare Parts List for Belt Grinding Machine TFP-75-605 When ordering spare parts please state machine type and serial number together with item number and description of the part according to this list. Part Number Item No. Description TFP-75-605 Belt release handle... -
Page 10: Technical Data
Weight in kg. * 5,5 HP motor available. The noise level for TFP-75-605 belt grinding machine has been measured to 80 dB(A) according to the measuring instruction in the note 561 from the Work Inspection Department on device of technical aids. -
Page 11: Circuit Diagrams
4.3 Circuit diagrams TFP-75-605 belt grinding machine can be connected to 3 x 400/440 V, 50/60 cycles and to 3 x 230 V 50/60 cycles. Fig.: 4.3.3 Diagram of belt grinder with brake 5. Warranty 5.1 Guarantee If within 2 years of purchase this machine supplied by TOOL FRANCE becomes defective...
Need help?
Do you have a question about the TFP-75-605 and is the answer not in the manual?
Questions and answers