ZINK Hardy 20 Light Festoon Instruction Manual

Technical Data
Supply Voltage: 220-240 V~ 50 Hz
The electrical supply to the unit should be provided
by connecting to a circuit protected by a fuse or miniature
circuit breaker suitable for the electrical rating of the unit.
Any plug, sockets and switches intended for use outdoors
must have a water IP rating as good as, or better than, the
protection rating of this unit.
Bulb Type: 20 X 10W Max. E27 LED only GLS bulbs
bulbs not included.
Conformity with all relevant EC and UK
&
Directive requirements.
Class 2 product, This item is double insulated,
this tting must not be earthed.
IP44
Protects against solid objects over 1mm and
sprays from all directions.
Limited ingress permitted.
(When bulb tted)
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or local store for recycling
advice.
Helpline
If you receive this item with parts broken or missing, please telephone:
Please have ready your name, address, tel. no., product reference, where purchased and parts
required. An answering service is in operation outside o ce hours and during busy periods.
We regret that we are unable to give advice on internal house wiring.
Cascade Holdings Ltd, Gorse Mill, Gorse Street, Chadderton, Oldham. OL9 9RJ
0333 0050077
ZN 41106
Hardy 20 Light Festoon
Instruction Manual
v3