Table of Contents
Advertisement
Menu Item
[Firmware Update]
[Licence]
Display Settings
Menu Item
[Illumination]
[Background]
Preset Display
Description
Updating the firmware version.
CAUTION
• The USB storage device for updating must contain only the
correct update file.
• Never turn this product off, disconnect the USB storage device
while the firmware is being updated.
• You can only update the firmware when the vehicle is stopped
and the handbrake is engaged.
1
Download the firmware update files into your
computer.
Connect a blank (formatted) USB storage device to
2
your computer then locate the correct update file and
copy it onto the USB storage device.
Connect the USB storage device to this product
3
(page 28).
4
Display the [System Settings] screen (page 43).
5
Touch [Firmware Update].
New firmware version information is displayed.
6
Touch [Update].
Follow the on-screen instructions to finish updating the
firmware.
NOTES
• This product will restart automatically after the firmware
update is completed if the update is successful.
• If an error message appears on the screen, touch the
display and perform the above steps again.
Displaying the open-source licence.
Description
Select an illumination colour from the preset list.
Touch the wallpaper from the preset items in this product
or original pictures via the external device and touch
[Apply].
Select the desired preset background display.
You can set your favourite screen from the connected USB
device by touching and sliding the bottom of screen to the
right.
- 47 -
Advertisement
Table of Contents
