Table of Contents
Advertisement
PL-X50
Ground wire connection
Connect
the
turntable
ground
terminal
plug
to the amplifier
ground (GND) terminal.
Stereo Radio Cassette
sion cord (sold separately).
Insert the plug connector into the
input (PHONO) terminals.
é
il
eConnect
the white plug to the
left
(L) channel,
and
the red
Re
plug to the right (R) channel.
ePlug each connector in as far as
it will go.
eThis
turntable is equipped with
a moving coil (MC) cartridge,
but an MC head amplifier is not
necessary.
Qutput cable
and ground wire
Amplifier input
terminals
(PHONO)
yp
Q
Power cord
=» SETTING
UP THE TURNTABLE
@
Make sure the location is level and flat.
@
Locate where vibrations from the floor or outside sources will not
be transmitted to the turntable,
@
Do
not place where
it will pick up vibrations from
the speaker
system. (Do not place in front of, or directly over speaker system.)
@
Place where
controls
are
easy
to operate,
and
where the record
and stylus are easily visible.
@
Place near the amplifier. (Within reach of the connection cables.)
®
Do not place in direct sunlight or near a stove or furnace.
@
Do
not
locate
turntable
in dusty, dirty or excessively humid
en-
vironment.
@
Be sure the unit is placed so the door does not hit anything when it
is opened.
amp
or
into
a
household
wail
socket.
Amplifier ground
terminal (GND)
Connection to automatic switching terminal
When
connecting
to the Pioneer
A-X50
or A-X30
integrated
NOTE:
:
If the amplifier has no automatic
switching
terminals,
this
plug is not used.
Advertisement
Table of Contents
