Table of Contents
Advertisement
CHAPTER -10: TROUBLESHOOTING
FAULT
Your machine does
not discharge water.
Your machine
vibrates.
(*) See the chapter regarding maintenance and cleaning of your
machine.
(**) See the chapter regarding installation of your machine.
POSSIBLE CAUSE
Discharging hose
clogged or twisted.
Pump filter clogged.
Laundries settled in
the machine non-
homogeneously.
The stays of your
machine not
adjusted.
Safety assembly
fitted for transport
not disassembled.
Less amount of
laundries in the
appliance.
Your machine
overloaded with
laundries or
laundries settled
non-homogeneously
Your machine rests
on a hard surface.
41
REMOVING
METHODS
Check the
discharging hose.
Clean the pump
filter. (*)
Spread your
laundries in the
machine properly
and homogeneously.
Adjust the stays of
your machine. (**)
Disassemble the
safety assembly of
your machine. (**)
This will not block
operation of your
machine.
Do not put laundries
more than the
amount
recommended and
settle the laundries in
the machine
homogeneously.
Prevent your
machine from resting
on hard surfaces.
When settling your
machine, leave 2 cm
space between it and
wall or hard
surfaces.
Advertisement
Table of Contents
