Download Print this page

Veris TP Series Installation Manual

Flush mount temperature sensors

Advertisement

Quick Links

Installation Guide
Temperature
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classi ed locations.
• Read and understand the instructions before installing this product.
• Turn o all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
If this product is used in a manner not speci ed by the manufacturer, the protection
provided by the product may be impaired. No responsibility is assumed by the
manufacturer for any consequences arising out of the use of this material.
Z206424-0D
Page 1 of 2
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Product Overview
TP flush mount temperature sensors monitor the temperature of the air in a room. They are ideal for spaces where
moisture and vapor are concerns. The back of the TP is insulated to reduce interior wall temperature influence. The
TP
TP is for indoor use only and it is warranted for a period of five years.
Product Identification
Sensor
Type
TP
B = 100R platinum, RTD
C = 1k platinum, RTD
D = 10k T2, Thermistor
E = 2.2k, Thermistor
F = 3k, Thermistor
H = 10k T3, Thermistor
I = 1k Balco (Nickel-iron) RTD
J = 10k Dale, Thermistor
K = 10k w/11k shunt, Thermistor
M = 20k NTC, Thermistor
N = 1800 ohm, Thermistor
W = 10k T2 high accuracy, Thermistor
Y = 10k T3 high accuracy, Thermistor
Specifications
Operating Temperature Range -10 to 50 °C (14 to 122 °F)
©2022 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
TP Series
Flush Mount Temperature Sensors
Cal Certificate
0 = None
2 = 3-point NIST calibration
Wiring 22 AWG; 2-wire: RTD/Thermistor
Housing Brushed 430 Stainless Steel
Mounting Location Not suitable for wet locations. For indoor use only.
0722

Advertisement

loading
Need help?

Need help?

Do you have a question about the TP Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Veris TP Series

  • Page 1 0722 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
  • Page 2 0722 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries. Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

This manual is also suitable for:

Tpb0Tpd0Tph0Tpc0