Download Print this page

LIXIL DXV D35700020 Installation Instructions

Decorative p-trap

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
Decorative P-Trap
Model D35700020
Thank you for selecting DXV. To ensure that your
installation proceeds smoothly, please read these
instructions carefully before you begin.
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing
supply stores. It is essential that the tools and materials be on hand before work is begun.
Channel Locks
ROUGHING-IN DIMENSIONS:
Important: Lavatory tailpiece must be on same center-line
as the waste outlet connection.
1-1/4" O.D. (32 mm O.D.)
WASTE CONNECTION
2 5/8"
(67 mm)
6-1/16"
(154 mm)
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 227-2734
www.DXV.com
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
Adjustable Wrench
Te on Tape
15-7/16"
(392 mm)
3-5/8"
(92 mm)
3-1/2"
(89 mm)
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: 1-800-395-1498
www.DXV.ca
Plumbers' Grease
LAVATORY
FOR 1-1/4" O.D.
(32 mm O.D.)
TAILPIECE
CLEAN OUT
- 1 -
Tubing Cutter
1-1/4" O.D.
(32 mm O.D.)
TAILPIECE
C/L
1-1/4" O.D. (32 mm O.D.)
WASTE CONNECTION
FINISHES
POLISHED CHROME
BRUSHED NICKEL
PLATINUM NICKEL
SATIN BRASS
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx
M965586 Rev. 1.2 (5/17)
100
144
150
427

Advertisement

loading

Summary of Contents for LIXIL DXV D35700020

  • Page 1 INSTALLATION INSTRUCTIONS Decorative P-Trap Model D35700020 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully before you begin. RECOMMENDED TOOLS AND MATERIALS Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing supply stores.
  • Page 2 INSTALL WASTE TUBE O-RING Fig. 1. • Unthread LOCKNUT (1) and remove the WASTE TUBE (2) from the P-TRAP (3). • Apply plumber’s grease to the end of WASTE TUBE (2). GREASE Slide WALL FLANGE (4) onto WASTE TUBE (2). Make sure O-Ring is installed.

This manual is also suitable for:

Dxv d35700020.100Dxv d35700020.110Dxv d35700020.427