Page 1
2hp Arp Gate-driven Arpeggiator Tech Specs Reset Input Width: 2HP Restarts the Arpeggio at the root note. Depth: 45mm Threshold: 0.4V Power Consumption: Chords +12V=40mA, -12V=3mA, +5V=0mA Trig Input Here are the available Chords and their LED indications: Advances the Arpeggio.
Page 2
PCB, just above the power header. You may notice that even though there is only 1 row of 5 pins on your 2hp module, but 2 rows on the power cable. You can use either row of 5 pin connectors on the cable with your module, so long as the red stripe is properly aligned.