Table of Contents
Advertisement
UNIT CONTROLLER
Menu Contents
Level 1
Level 2
Level 3
Controller Options
Room Name
Date and Time
Adjust Date and Time
European Summer Time
UTC Zone
Screen settings
Language selection
Commissioning
Air purge
Start Air purge
Test run
Start test run
About
System Information
Contact Information
Factory Reset
Return to user mode
38
PMEN0638 rev.0 - 04/2023
Level 5
Level 4
Level 6
Installer mode
Icon
means that this menu is available only for installer,
a special user with higher access privileges to configure the
system. In order to access the controller as Installer, "OK" and
"
" buttons must be pressed for 3 seconds.
OK
After that, the "Enter password" message is displayed.
The login password for the Installer is:
Right
, Down
Press "OK" to confirm the password.
If the correct access code is entered, the installer mode icon
appears on the notifications bar (bottom line).
Installer mode icon
After 30 minutes of inactivity, it is necessary to repeat the log in
process. To exit the Installer mode and return to the unit menu,
hold down the "
" button for 3 seconds or go to the "Return to
user mode" on the main menu.
?
N O T E
The following chapters explain the special settings the Installer can edit.
It is important to understand that the Installer can also perform all the
actions available for the typical user.
+
, Left
, Right
Advertisement
Table of Contents
