1. About Your printing Terminal Front view ❶ NFC reader —— For Proximity card, membership card ❷ Printer —— Printing documents in power-on mode ❸ Power button—— Short press and Long press Short press: light up the screen, lock the screen Long press: In the off state, press and hold for 2~3 seconds to turn on the phone.
Back view ❶ Camera —— Support for taking pictures and 1D/2D quick scan. ❷ Speaker —— Remind merchants of each transaction in a timely manner ❸ SIM Slot Note: When inserting or removing the SIM card, please make sure the machine is off, as plugging and unplugging in the on state may cause the machine to malfunction.
2. Printing Instructions Printing tips -This machine supports 58mm thermal paper, 57±0.5mm × 40mm. -Please open the paper compartment (shown in the illustration) by opening the cover handle, do not force the paper to prevent the print head gear from wearing out. -Place the paper in the paper compartment correctly in the direction shown in the figure, and pull out part of the paper to the outside of the cutter (Figure 1-1).
3. Precautions Safety Warning Please insert the AC plug into the AC outlet corresponding to the marked input on the accessory power adapter This is a Class A product. In living environments, this product may cause radio interference. In this case, the user may be required to take practical measures against interference. -Use only the battery supplied with the unit.
Declaration Our company is not responsible for the following actions -Damage caused by not using and maintaining the device under the conditions described in this guide. -For damage or problems caused by options or consumables (other than the original or approved products provided by the Company).
Improper battery use may result in a fire, explosion, or other hazard. 5. Limited Warranty and liability Kingtop Corp. warrants for the 12-month period immediately following receipt of the Product by Purchaser that the Product will be free from defects in material and workmanship under normal use.
(IV) damage caused by force of nature or act of any third person, (V) shipping damage, (VI) service or repair of Product by the purchaser without prior written consent from KINGTOP CORP, (VII) products designated by KINGTOP CORP as beta site test samples, experimental, developmental, reproduction, sample, incomplete or out of specification Products, or (VIII) returned products if the original identification marks have been removed or altered.
Need help?
Do you have a question about the KT-V510 and is the answer not in the manual?
Questions and answers