Connecting Power Supply; Functions - Curtis DVD5045 Operating Instructions Manual

BASIC DVD OPERATION
AUTO 2X
2X
MEMO
To activate either function, simply press the
key or key on the remote control. The
speed changes each time the key is pressed.
To resume normal playback, press the PLAY key.
Memory Playback
This unit allows the viewer to stop playback,
then later continue playback from that exact disc
location. Press the STOP key to halt playback.
The unit then will memorize the location where
playback was stopped. To resume watching,
press the RESUME or PLAY key and the unit will
resume playback from the exact location where
playback was stopped. (Exclude Mp3 DISC)
When you play DVD discs, press MENU or
TITLE key return menu and title, the unit then
will memorize the location, To resume watching
press the RESUME key and the unit will resume
playback from the exact location.
PLAY
RESUME
Slow Motion
This DVD receiver has the ability to play
discs in slow motion in either forward or reverse
direction. Each time the SLOW key is pressed,
the speed will slow from forward slow speed1/ 2,
to 1/ 4, to 1/ 8, to 1/ 16 to reverse slow speed 1/ 2,
to 1/ 4, to 1/ 8, to 1/ 16, to normal speed. To
resume normal playback, press the PLAY key.
SLOW

FUNCTIONS

Screen Display
While a disc is playing, the status of various
functions may be checked, such as the tile, track
number, and several time categories.
1. Press the DISPLAY key once and the title
appears along with the chapter and how much
time has played.
DISPLAY
TT 01/02 CH 02/ 28
00:21:05
2. Press the DISPLAY key again and the
remaining time for that particular title appears.
TITLE REMAIN
01 44 34
3. Press the DISPLAY key again and the total
elapsed time for that particular chapter appears.
CHAPTER ELAPSED
4. Press the DISPLAY key again and the
total remaining time for that particular chapter
appears.
CHAPTER REMAIN
5. Press the DISPLAY key again and the
display turns off.
16

CONNECTING POWER SUPPLY

POWER
DVD5045 DVD & AMPLIFIER SYSTEM
Before plugging the power cord into the AC outlet, check to make sure all of the connections
have been properly completed. When they have been done, carefully plug power cord into outlet.
Press the POWER button on the front panel to power the unit. The display panel will light.
When the unit is initially powered, a brief surge of electricity may cause interference with other
electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different
circuit.
17
BASIC OPERATION
Selecting Sound Source
1. Press any function button (DVD, AM/FM,
AUX1, AUX2) to select the desired sound source.
The appropriate symbol will appear in the display.
2. When the AM/FM tuner button is pressed,
the last station listened to will play.
Note: The desired program source will not play
unless it and the selected signal button coincide
with the active program source signal input.
DVD/ CD/ MP3/ CD-RW/ HDCD/ JPEG
OPEN/CLOSE
Volume Control
The volume may be adjusted by either turning
the large volume knob on the front panel or
using the appropriate volume button on the
remote control. Range from 0 to 80 levels.
Mute
Pressing the MUTE button temporarily mutes
every speaker. To resume audio, press MUTE
button again.
13