Subscribe to Our Youtube Channel
Related Manuals for Binderberger H6 E
Summary of Contents for Binderberger H6 E
- Page 1 Short log splitter Original Operator‘s Manual Copyright by Binderberger GmbH Read the operating instructions carefully before commissioning the machine! Version 2.0 2011-12 Seite 0...
- Page 2 This manual is valid for: Model Article number H6 E KH-M6-1 H8 E KH-M8-1 H8 EZ KH-M8-2 Model Article number SP8 Z KH-MSP-1 SP8 E KH-MSP-2 SP8 EZ KH-MSP-3 Version of this manual: Creation date: 2021-03 Short log splitter 2021-03...
-
Page 3: Table Of Contents
Table of Content EC Declaration of Conformity ..............5 Safety instructions .................. 6 2.1 Explanation of symbols ..............6 2.2 Pictograms and their meaning: ............7 2.3 General safety instructions ..............8 2.4 Intended use ..................8 2.5 Operator requirements ..............8 2.6 Modifications to the machine ............ - Page 4 Operation ....................20 6.1 Safety instructions during operation ..........20 6.2 Important notes during operation ........... 21 6.3 How the safety two-hand control works ......... 22 6.4 Splitting height adjustment (H6, H8) ..........22 6.5 Splitting length adjustment (SP8) ............ 23 6.6 The splitting process (H6, H8) ............
- Page 5 Help in case of malfunctions ..............33 9.1 Safety instructions ................33 9.2 Troubleshooting ................34 10 Guarantee and Warranty ..............36 11 Conduct when dealing with accidents ..........37 12 Notes ..................... 38 Short log splitter 2021-03 Page 4...
-
Page 6: Ec Declaration Of Conformity
We hereby declare that the various technical versions of the machine: Designation: Short log splitter Type: H6 E, H8 E, H8 EZ, SP8 Z, SP8 E, SP8 EZ Serial number: comply with the provisions of the Machinery Directive 2006/42 / EC, the EN 609-1 and the other related standards. -
Page 7: Safety Instructions
2. Safety instructions Safety instructions Explanation of symbols Please pay attention to the meaning of the following symbolic explanations and instructions description. They are divided into levels of risk and classified in accordance with ISO 3864- 2 DANGER Indicates an immediate threat of danger. If the information is not followed, death or serious bodily injury (invalidity) is the result. -
Page 8: Pictograms And Their Meaning
2. Safety instructions Pictograms and their meaning: Read the operating instructions carefully before commissioning! Earmuffs and safety goggles must be worn during operation! Wear safety shoes (with steel toecap) during operation! Gloves must be worn during operation. The machine may only be operated by one person Warning of hot media Warning against rotating parts... -
Page 9: General Safety Instructions
2. Safety instructions General safety instructions The machine may only be operated by people who are trained, instructed and authorised for its use. These people must know the operating instructions and act in accordance with them. The respective competences of the operating personnel are clearly defined. Operating personnel undergoing training may only initially work with the machine under the supervision of an experienced person. -
Page 10: Modifications To The Machine
2. Safety instructions Modifications to the machine For safety reasons, no unauthorised modifications may be made to the machine; this applies in particular to welding work on load-bearing parts. Only use original spare parts / original wear parts / original accessories - these parts are specially designed for the machine. -
Page 11: Description Of The Machine
6 / 8 tons. The maximum splitting length of 55 centimetres allows splitting of all types of short wood. The desired lifting height of the Binderberger H6 log splitter can be steplessly adjusted by chain. The user can thus adjust the setting flexibly, quickly and with just one movement of the hand to the respective requirements. -
Page 12: Overview
3. Overview Overview Short log splitter 2021-03 Page 11... -
Page 13: Technical Data
3. Overview Technical data Type E / Z E / Z Splitting force [t] Wood length [cm] Weight* [kg] E-motor power [kW] Motor speed [rpm] 1500 1400 1400 PTO -speed [rpm] Hydraulic oil litres Splitting speed* 7 / 10 9 / 11 [cm/s] Retract speed. -
Page 14: Transport Of The Machine
4. Transportation 4 Transport of the machine Safety instructions during transport WARNING Risk of injury during transport! • Make sure that there are no persons in the danger zone and that a sufficient safety distance is kept! • Lubricants may have leaked out due to inclined positions during transport;... -
Page 15: Transport Journeys And Journeys In Public Roads
4.Transportation Transport journeys and journeys in public roads Before transporting the machine, all points of decommissioning must be carried out. When driving on public roads, the national legal regulations must be observed! If the log splitter is hitched to the tractor and you want to transport it, make sure that there are no parts on the machine that could fall off and that the log splitter is properly attached to the tractor's 3-point linkage. -
Page 16: Manual Transport
4.Transportation Manual Transport For manual transport, the log splitter must first be disconnected from the tractor drive or the mains. Likewise, the splitter must still be unhooked from the 3-point. Remove all tripping hazards from the transport area and ensure that the machine is in a good standing position. -
Page 17: Set Up Of The Machine
5. Set up 5 Set up of the machine Safety instructions for set up WARNING Risk of injury if the machine is not set up correctly! • Always check the machine for transport damage before setting it up! • Set up the machine on a level and firm surface! •... -
Page 18: Duties Before Starting Work
5. Set up Duties before starting work NOTICE Carry out the following steps before starting work: • Assembly and connection must be carried out according to the instructions. • Check all hoses, couplings, bolts and screw connections for tightness before starting work. -
Page 19: Check Direction Of Rotation Of Motor
5. Set up Check direction of rotation of motor Switch on the motor only briefly and check the direction of rotation on the fan blades of the motor. The correct direction of rotation is indicated by the sticker on the fan cover of the motor. If the direction of rotation is not correct, disconnect the supply line to the log splitter. -
Page 20: Connecting The Pto Shaft
5. Set up Connecting the PTO shaft Drive the tractor in front of the log splitter and hitch it to the tractor's three- point linkage. Park the tractor. Now you can connect the splitter and the tractor to the PTO shaft. -
Page 21: Operation
6. Operation Operation Safety instructions during operation DANGER Risk of injury from being caught or pulled in on moving machine parts! • Keep a sufficient safety distance from moving machine parts! WARNING Risk of injury when operating! • Make sure that only the operator is at the control panel. -
Page 22: Important Notes During Operation
6. Operation Important notes during operation NOTICE • The operating personnel must ensure that no unauthorised persons are in the working area of the machine. • Before switching on the machine, inform yourself about the correct behaviour in case of malfunctions. -
Page 23: How The Safety Two-Hand Control Works
6. Operation How the safety two-hand control works The splitting process can only be triggered by pressing both hand levers downwards or, in the case of the SP8, by pulling them forwards. If only one hand lever is pressed, no movement takes place. The same applies if only one hand lever is released during the splitting process. -
Page 24: Splitting Length Adjustment (Sp8)
6. Operation Splitting length adjustment (SP8) To adjust the splitting length of the log splitter, extend the cylinder to the desired height by pressing the two hand levers. Once you have reached the optimum position, release one of the hand levers. The cylinder remains in this position and you can adjust the stroke height. -
Page 25: The Splitting Process (Sp8)
6. Operation The splitting process (SP8) Place the wood in the splitting tray. Adjust the height of the splitting wedge with the lever (1) to the right of the two- hand control. This can either be set all the way down to split the wood only centrally into two pieces or into four pieces in one splitting operation. -
Page 26: Shutdown
7. Shut down 7 Shutdown Safety instructions for decommissioning DANGER Risk of injury from being caught or pulled in on moving machine parts! • After parking, wait until all moving machine parts have come to a standstill! • Keep a sufficient safety distance from moving machine parts! WARNING Risk of injury when taking out of operation! -
Page 27: Turn Off The Splitter
7. Shut down WARNING Risk of injury when switching on the machine by unauthorised persons! • Secure the machine after operation against unauthorised switching on! • When leaving the workplace of the machine for a longer period of time, disconnect the power source. Turn off the splitter Turn off the machine and disconnect it from the power source. -
Page 28: Maintenance
8. Maintenance 8 Maintenance Safety instructions during maintenance DANGER Serious risk of injury from switching on the drive during maintenance work! • Switch off the machine! • Secure against being switched on again! CAUTION Lubricants! • Use suitable collection containers. •... -
Page 29: Important Instructions During Maintenance
8. Maintenance Important instructions during maintenance NOTICE • Replace all machine parts that are not in perfect working condition immediately. • Only use original spare parts. • Ensure that suitable collection containers are available for all substances hazardous to groundwater (oils, etc.). •... -
Page 30: Notes When Working On Electrical Equipment
8. Maintenance Notes when working on electrical equipment All work on the electrical equipment of the machine may only be carried out by trained electricians. • Check electrical equipment regularly. • Reattach loose connections. • Replace damaged lines or cables immediately. •... -
Page 31: Changing The Hydraulic Oil
8. Maintenance Changing the hydraulic oil The oil should be changed every 250 operating hours or once a year. The oil quantity can be found in the technical data for your log splitter. HLP 32 or equivalent oil must be used as the hydraulic oil. Make sure that an appropriately large collection container is available. -
Page 32: Changing The Oil In The Gear Box
8. Maintenance Changing the oil in the gear box (only for PTO pump operated log splitters) The gear oil should be changed for the first time after 100 operating hours. Thereafter every 500 operating hours or once a year. The gear oil used should be of viscosity class SAE 90. -
Page 33: Maintenance Time Scheme
8. Maintenance 8.10 Maintenance time scheme Regular maintenance is the best guarantee that your splitter will work effectively and economically. The short log splitter has already been carefully tested and adjusted at the factory. Thereafter every 1.st time after 250h or 1 time per year I-Beam Lightly grease... -
Page 34: Help In Case Of Malfunctions
9. Malfunctions 9 Help in case of malfunctions Safety instructions DANGER Serious risk of injury from switching on the drive in the event of a malfunction! • Switch off the machine! • Secure against being switched on again! CAUTION Risk of injury! Scalding by hot machine components and media! •... -
Page 35: Troubleshooting
9. Malfunctions Troubleshooting Error Error Cause Look up correction Incorrect direction Change the direction of motor rotation of rotation with the Splitting wedge does (electric drive) phase inverter not extend Too little hydraulic Check oil level oil in the system Motor protection Supply line too weak responds... - Page 36 9. Malfunctions Turn the wood Only split the wood Wood too knotty 6.6 / 6.7 half the length of the Splitting wedge blade blocked Gasket set leaking (only with very Contact a Replace gasket set high operating specialist hours) Too little oil in the Check oil level system Old oil in the...
-
Page 37: Guarantee And Warranty
The fault should be repaired upon the mutual arrangement of the customer, the appointed dealer and the Binderberger company. The fault should be repaired following a mutual arrangement between the customer, the appointed dealer and the Binderberger company. -
Page 38: Conduct When Dealing With Accidents
In a disaster situation, immediately leave the machine (fire). Note In the pursuit of technical advancement, Binderberger Maschinenbau GmbH continually works to improve its products. We reserve the right to make changes from the illustrations and descriptions in this operating manual/replacement parts list. -
Page 39: Notes
12 Notes Short log splitter 2021-03 Page 38... - Page 40 Dealer’s stamp: ü Name plate: Maschinenbau GmbH Fillmannsbach 9 A-5144 St. Georgen am Fillmannsbach Phone: +43 / 7748 / 8620 Fax: +43 / 7748 / 8620 – 20 office@binderberger.com www.binderberger.com Short log splitter 2021-03 Page 39...
Need help?
Do you have a question about the H6 E and is the answer not in the manual?
Questions and answers