Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Wexiodisk WD-RO150
- Page 1 WD-RO150 DIRECT FLOW MANUAL English Version Version 2 From Serial Number:...
- Page 2 INDEX User manual Technical manual 9-16 Technical data sheet 17-18 Spare Parts list...
-
Page 3: Prior Warnings
USER MANUAL 1. INTRODUCTION the functionality and status indications, as well as the different security systems. Congratulations. You have acquired excellent equip- The equipment’s technical data sheet describes the ment for commercial HORECA Use. states in which the system can be found and the infor- mation provided by it. -
Page 4: Troubleshooting
5. TROUBLESHOOTING TROUBLE POSIBLE CAUSE SOLUTION Several possible causes. 2. Zero production. • There is no water supply. • Wait for the supply to return. • There is no power supply. • Check the electrical supply of the location. If the problem •... -
Page 5: Operating Limits
TECHNICAL MANUAL 1. MAIN FEATURES Water treatment Reverse osmosis for Commercial Use (HORECA) Modifications for reduction or contribution -Water treatment by reverse osmosis is capable of reducing concentrations of salts and other substances in high percentages. -Minimal reduction * of certain compounds and parameters: Sodium: 85%. -
Page 6: Equipment Installation
In case the water to be treated contains: ATTENTION: The equipment must not be installed next to a • High concentrations of iron and manganese (Greater heat source or directly receiving a flow of than 1ppm measured in the rejection of the machine). • hotairover it . - Page 7 an adjoining piece of furniture. Install the production outlet, drain collar and inlet adapter and connect them to the respective equipment connectors (6 and 7). 6 mm 6. START-UP 6.1. FILTER RINSING • It is necessary to eliminate the dust of the carbon filter that is generated during the transport and handling of the equip- ment.
- Page 8 the equipment are accessed or no water has been consu- med for more than a month. * Depending on the intended use and characteristics of the water to be treated. ATTENTION: All consumables are supplied in indivi- dual packaging specially designed to guarantee hygie- nicstorageandtransportconditions.
-
Page 9: Data Sheet
TECHNICAL DATA SHEET 1. MAIN FEATURES 4 bar - 1 bar (400kPa-100kPa). Pressure (max/min): 1500ppm. TDS (max): 38 ºC - 5 ºC. Temperature (max/min): 150 ppm Hardness (max): 1. Filter/Bypass Connection Maximum pressure switch. Inlet control Control type: 2. Outlet Connection solenoid valve. -
Page 10: Hydraulic Scheme
CF pre-filter 1 x sediment / carbon combined. RO Membrane OUT/PURE WASTE Adapter: 230 VAC 50/60Hz: 36VDC 5A Production: bar Automatic Flushing (See Section 3.3) HYDRAULIC SCHEME Manual Bypass External... -
Page 11: Operation Of The Equipment
For salinities higher than 1500ppm consult with your dealer. ** Maximum accumulation as a function of the pres- sure entry. **** Flow rates may vary by 20% depending on of the ***** May vary depending on the model. 1 2 3 External Device can be Wall Faucet mounted... - Page 12 Display: 1. Working indicator 2. CF filter life indicator/pusher 3. RO membrane filter life indicator/pusher 4. Failure / quality water indicator 3.1. COLORS OF THE WATER QUALITY INDICATOR Blue: TDS≤200ppm* Purple: 200ppm <TDS ≤ 300ppm* Red: TDS> 300ppm* *Linked to the selected Program 3.2.
- Page 13 3.3. FUNCTIONALITIES FUNCTION ACTION STATUS OF THE LIGHTS 1. Functional flushing The machine will flush the RO membra- During washing, the water quality light is for the first use or ne for 5 minutes. flashing at 1Hz. after reset. 2. Flushing when tur- Whenever the system is started it will When flushing is in progress, the water ning on the machine.
- Page 14 3.4. BUG IDENTIFICATION AND RESOLUTION TYPE TIMER SOLUTION DISPLAY ACOUSTIC 1. Leak inside the Water quality indicator, Beeps for 3 When the leak is eliminated, the alarm machine. CF and MRO flashing minutes. is deactivated and it returns to the nor- mal state.
- Page 15 Pumptime Low temperature protection Blink red 1 Hz Blink Purple 1 Hz Blink red 1 Hz Blink red 1 Hz BLUE PURPLE beeps beeps...
- Page 16 3.7. 3.6. SMART DEVICE STATUS INDICATORS The smart device replicates on its outer ring the status of the filters that are seen on the equipment display (CF, MRO). The droplet symbol replicates the status of the water quality indicator LED. CODE CHANGE IN INTERFACE (Code Table see next Ring: Life Status of the page):...
- Page 17 3.7. CODE TABLE FOR THE EXTERNAL DEVICE These are the Programs to be Set with the External Device to adjust the WD-RO150 to the Inlet Water Quality. Please be aware that this Manual is for the new Programming and has 16 Programs. If you can select only Program 11 and the next Program is 00, please ask your Dealer for the Old Version of this Manual.
- Page 18 3.7. CODE TABLE FOR THE EXTERNAL DEVICE Program Inlet Water Quality TDS Quality Level Lifetime CF Filter/MRO Membrane Blue: TDS < 200 ppm No pre-treatment CF prefilter: 6 months or 8000 lts Violet: 200 ppm < TDS < 300 ppm With TDS inlet water higher than 1.200 ppm RO membrane: 36 months or 100000 lts Red: TDS >300 ppm...
- Page 19 Spare parts list...
- Page 20 DWG.No Article Number Partname, 100-2511 POSITIONING 100-2512 CARTRIDGESEAT 100-2513 INLET SOLENOID VALVE 100-2514 HYDRAlJUC 100-2515 ELECTRONIC CARD 100-2516 ADAPTER "T" 100-2517 SMART DISPLAY 100-0009 MEMBRANE 100-0008 COMBI SEDIMENT CARBON BLOCK 100-2518 TUBEl/4 100-2519 TUBE WHITE 100-2521 TUBE 3/8 WHITE 100-2522 DECK 100-2523 BOOSTER PUMP...
- Page 21 TELEFON : + 46 470 77 12 00 ADRESS : Mårdvägen 4 SE - 352 45 Växjö SWEDEN E-POST : wexiodisk@wexiodisk.com WEBB : www.wexiodisk.com...
Need help?
Do you have a question about the WD-RO150 and is the answer not in the manual?
Questions and answers