Download Print this page

TE Connectivity 69X1N Series Installation Manual

Iot wireless pressure sensor

Advertisement

Quick Links

IoT Wireless Pressure Sensor Installation Manual
LoRa & BLE
US Coverage
ANSI/UL 60079-0-2020
o
ANSI/UL 60079-11-2018
o
ANSI/UL 913-2019
o
UL 61010-1, 3rd Edition (2012) + AMD1:2018
o
FCC Certified
o
Canadian Coverage
CSA C22.2 No. 60079-0:19
o
CAN/CSA C22.2 No. 60079-11:14
o
CAN/CSA C22.2 No. 61010-1-12 + Update No 1:2015
o
+ Update No 2:2016 + AMD1:2018
ISED Certified
o
European/IECEx Coverage
IEC 60079-0:2017 Edition: 7.0
o
IEC 60079-11:2011 Edition: 6.0
o
IEC 61010-1:2010, IEC 61010-1:2010/AMD1:2016
o
RED Compliant
o
Radio Frequency Communication
Bluetooth® Qualified
o
LoRaWAN Certified
o
®
The LoRa
Mark and Logo are registered trademarks of
Semtech Corporation or its affiliates
TE CONNECTIVITY
SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR
Ex rated document, no changes allowed unless authorized by Ex agency
CM
.
Environmental Information
Ambient Temperature -30 °C to + 75°C
IP66/IP67
Models 69X1N Series
SUPPLY: 2.8-3.6V / 4μA-35mA
FCC ID: 2A85PA6XX1N
IC: 29620-A6XX1N
915MHz for US and 868MHz for EU
Models 65X1N Series
SUPPLY: 3.6V / 4μA–35mA
FCC ID: 2A85PA6XX1N
IC: 2A85PA6XX1N
Explosive
Atmospheres
Models 69X1N-EX and 65X1N-EX Series
US and Canada:
CSA23CA80179223X
IS CL I, DIV 1, GRP A, B, C, D, T4;
CL I, ZN 0, AEx ia IIC T4 Ga;
ATEX and IECEx:
EPS 23 ATEX 1 117 X
IECEx EPS 23 .0042X
Ex II 1 G, Ex ia IIC T4 Ga;
20027955-01 Rev. B, 2023-11-30
Designations
for
Page 1

Advertisement

loading

Summary of Contents for TE Connectivity 69X1N Series

  • Page 1 IoT Wireless Pressure Sensor Installation Manual LoRa & BLE Environmental Information Ambient Temperature -30 °C to + 75°C IP66/IP67 Models 69X1N Series SUPPLY: 2.8-3.6V / 4μA-35mA FCC ID: 2A85PA6XX1N IC: 29620-A6XX1N 915MHz for US and 868MHz for EU  US Coverage...
  • Page 2 200bars) Update in the sensor mounting torque, the mounting/ installation recommendations and IS drawing. TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 2 20027955-01 Rev. B, 2023-11-30 Ex rated document, no changes allowed unless authorized by Ex agency...
  • Page 3: Warning & Important Safety Instructions

    CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 3 20027955-01 Rev. B, 2023-11-30...
  • Page 4: Electrical Installation

    3. Use only 3.6 V SAFT battery LS17330 Primary lithium-thionyl chloride (Li-SOCL2) 2/3 A-size bobbin cell. 4. It is only allowed to replace the battery in non-hazardous areas. TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 4 20027955-01 Rev. B, 2023-11-30...
  • Page 5: Battery Installation And Replacement

    Put the orange ribbon back to the cavity before install the new battery. 3. Install the plastic housing and tighten it following the locking direction. BATTERY REPLACEMENT TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 5 20027955-01 Rev. B, 2023-11-30...
  • Page 6: Sensor Mounting

    Pressure Sensor Range 200 and 350 Bar, max torque is 35Nm Assembly torque depends on many factors, in particular the lubrication, the coating and the surface finish. !The user should qualify the tighten torque in their application! TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 6 20027955-01 Rev.
  • Page 7 WARNING – To reduce the risk of burns or frost bite, wear protective personal equipment when installing or removing from high or below-freezing temperature process or environments. WARNING – After installation carefully check for leaks. TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 7 20027955-01 Rev.
  • Page 8 20015809-02 Intrinsic safety Drawing TE CONNECTIVITY SENSORS/// MODEL 69X1N & 65X1N PRESSURE SENSOR Page 8 20027955-01 Rev. B, 2023-11-30 Ex rated document, no changes allowed unless authorized by Ex agency...
  • Page 9 TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.

This manual is also suitable for:

65x1n series