Table of Contents
Advertisement
Functioning Time
Desired functioning time is selected by rotating the
Timer Button (5).
For periods shorter than 2 minutes adjust the timer
to a higher position and then back to the required
time.
Whenever the timer is in a position other than zero
then the oven light should switch on.
When the time is up, the timer will emit a sound
signal and oven will automatically be switched off.
While Working ...
The oven door may be opened at any time while in
use:
-
THE
PRODUCTION
IMMEDIATELY INTERRUPTED;
-
The grill will be switched off, however, remaining
very hot;
-
The timer will stop automatically, indicating the
time left.
You may then, if you wish:
-
Stir or turn the food, to improve even heating;
-
Change the power level on the Power Regulator
(4);
-
Select another function by setting the Function
Selector (3) on another position;
-
Change the remaining functioning time by
turning the Timer Button (5).
Close the door again and press the Start Button (6)
in the models with this button. The oven will start
working.
OF
MICROWAVES
CAUTION: at the end of the cooking process turn
the Timer Button (5) to zero, otherwise the oven
will start when the door is closed.
Note:
1. To stop the oven before the programmed time,
rotate the Timer Button (5) to zero or open the
door.
2. While the oven is working, you may change the
timer, the power level or the function, by
rotating the respective buttons.
IS
7
Advertisement
Table of Contents
