KF-35 Dear user; Thank you for entrusting your valuable belongings to us. The product you purchased is manufactured by MAKFA Electronics Ltd. in Turkey. ATTENTION Store n a concealed and secure locat on. Ensure that the storage area s cool and dry.
KF-35 POSITIONING Inside the safe, there are 4 holes: 2 at the back and 2 at the bottom. Place the safe in the desired location, then proceed with the assembly using anchors and screws. It's important to mount the safe to a stable and motionless surface. Additionally, ensure that the safe is leveled during installation.
KF-35 OPENING THE SAFE DOOR WITH THE MASTER CODE While the safe is locked, press the "LOCK" button twice. "SUPER" will appear on the screen. After the "SUPER" message Close:enter 3-6 d g ts,press LOCK Close:enter 3-6 d g ts,press LOCK...
Page 5
KF-35 RESET TO FACTORY DEFAULT MASTER CODE Unlock the safe door using the user code or the hand terminal. Do not perform the reset operation using the mechanical key, as this may result in the product displaying an 'E-BAR' error and becoming unusable, which could void the warranty Remove the four screws located on the back of the panel.
Page 6
KF-35 OPENING THE SAFE WITH MECHANICAL KEY The mechan cal key s only for emergency s tuat ons. It s not su table for regular use. You cannot lock an open safe w th the mechan cal key!!! If you do not know the user and master codes, and you do not have the hand terminal, or if the safe's battery is depleted, use the mechanical key.
Page 7
KF-35 CHANGING SYSTEM TIME With the cash register lock open, press the Close:enter 3-6 d g ts,press LOCK Close:enter 3-6 d g ts,press LOCK Open:enter same code Open:enter same code "Clear" button twice. The display will show "PROG." Once the "Prog" text disappears, enter "055261"...
Page 8
KF-35 TO CHECK THE OPENING RECORDS Close:enter 3-6 d g ts,press LOCK Close:enter 3-6 d g ts,press LOCK Open:enter same code Open:enter same code While the cash register lock is open, first press the "Clear" button twice. The display will show "PROG."...
KF-35 PARAMETER SETTINGS While the safe box is open, first press the 'Clear' button twice. The display will show 'PROG.' After the 'Prog' text disappears, enter '711469' and press the 'LOCK' button. The display will show 'CODE.' After a brief wait, the 6-digit parameter menu will appear.
KF-35 OTHER FEATURES When you enter the wrong number, press the "CLEAR" button to Tdelete the entered number. If you enter the user password incorrectly, "E-CODE" CLEAR LOCK will appear on the screen. If you enter the wrong code, "ERROR" will appear on the screen.
KF-35 GENERAL WARNINGS Never leave the mechanical key or handheld terminal inside the safe box. The mechanical key is not suitable for regular use. However, in emergency situations where you do not know the user or master password, and you do not have access to a handheld terminal due to a depleted battery, you can open the safe box using the mechanical key.